INTEGRITY Solutions MP300 Portable Mini Bluetooth Pocket Printer User Manual
- June 6, 2024
- INTEGRITY Solutions
Table of Contents
INTEGRITY Solutions MP300 Portable Mini Bluetooth Pocket Printer
Introduction
Thank you for choosing the intelligent digital products produced by our
company. We have equipped with detailed instruction. Please read the
instruction carefully before you start using this machine, so that you can use
this product correctly.
Product: MINI POCKET PRINTER
Model Name: MP300
Note: The image shown here is indicative only. Please refer to the
product you actually purchased.
Product Mix
- Mini Pocket Printer • 1
- User Manual* 1
- USB Cable *1
Product Sketch
App Printing Driver Download
Google play or App store to search for iBleem.
Power Indicator Status
White light on: Fully charged / Normal use status. White light flash: Charging
/ Out of paper/ Over-heat/ Cover opened.
Low power. It will cause the print to be light .
Please charge in time.
Connect To Printer
App printing: Turn on the device, following the “iBleem” App prompts to search and connect printer. Or Double-click the power button to print the QR code, then use the App to scan the code to connect printer.
Vharging Instruction
DC 5V lA input charging. Recommended to use mobile phone adapter for chacging; Recommended to fully charge for the first time; If it is not used for a long time, please charge it every 3 months to avoid long-term natural loss oflithium battery.
Open/Close cover and change paper
- Open Cover
- Paper Loading
- Close Cover
Clean the Printer Head
- Please turn off the printer and take out the paper inside.
- Dip a cotton cloth or cotton swab with medical alcohol and wipe it gently from the center to periphery of the print head.
- Do not use the printer immediately after cleaning the print head, Please wait 1-2 minutes for the alcohol to completely evaporate.
Battery Wearning Notes
- Please use 5V charger to charge according to the specification to avoid damage to the machine.
- Disassembly, impact, extrusion or fire are prohibited.
- If severe bulging occurs, do not continue to use.
- Do not put in high temperature environment, battery after immersion is prolubited to use.
- Replacement with the wrong type ofbattery can be explosive, be sure
Attention
- when charging, please gently insert or pull out the charging line to prevent excessive force damage to the port.
- After charging, please unplug the charging line in time.
- In order to avoid danger, do not use or charge in high temperature, high humidity, excessive smoke and dust environment. such as: bathroom, steam room, open fire, etc.
- Improper charging may lead to print head damage.
- Do not touch the print head to prevent overheating and scalding.
- Tear paper blade sharp, be careful not to touch.
- Contains small parts, not suitable for children under three years of age to use.
FCC Statment
changes or modifications not expressly a pproved by the party respons ible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any inte rference received, including inte rfe re
nce that may cause undesired operation.
Note: This equipment has been tested a nd found to comply with the limits for
a Class B digita l device, purs uant to Part 15 of the FCC Rules. These limits
a re designed to provide reasonable protection against harmful interfe rence
in a residentia l installation. This equipme nt generates, uses.and can
radiate radio frequency energy, and if not insta lled a nd used in accorda nce
with the instructions , may cause harmful inte rfe rence to radio
communications. However, there is no gua ra ntee that inte rfe rence will not
occur in a particular ins ta llation. If t his equipment does cause ha rmful
inte rfe rence to radio or television reception, which can be determined by
turning the equipme nt off a nd on, the user Is e ncouraged to try to correct
the interference by one or more of the following measures:
- – Reorient or relocate the receiving a ntenna .
– Increase the sepa ration between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the deale r or an experie nced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>