anko K 43-363-889 Tall and Wide Metal Gate Instruction Manual
- August 24, 2024
- Anko
Table of Contents
anko K 43-363-889 Tall and Wide Metal Gate
Specifications
- Product: Tall & Wide Metal Gate With Extensions
- Conformance: EN1930:2011
- Intended Use: Children aged 6 to 24 months or small to medium pets
- Installation: Pressure-mounted gate
fits openings:
- 75cm – 83cm (no extensions)
- 87.5cm – 95.5cm (1 x 12.7cm extension)
- 100.5cm – 108.5cm (1 x 25.4cm extension)
- 113cm – 121cm (1 x 12.7cm & 1 x 25.4cm extensions)
FAQs
Q: Can this gate be used at the top of the stairs?
A: No, to prevent falls, never use this product at the top of the stairs. If used at the bottom of stairs, position it at the front of the lowest tread possible.
Q: What should I do if I notice a gap at the door opening after unpacking the gate?
A: This is normal with pressure-mounted gates. The gap will disappear when the gate is installed correctly.
Q: How do I know if I need extensions for the gate?
A: Measure the space to be enclosed. If your space falls within the range mentioned in the manual, you may need extensions. Follow the extension installation instructions provided.
WARNINGS
- WARNING To prevent serious injury or death, securely install the gate or enclosure and use it according to manufacturer’sinstructions.
- WARNING Never leave your child unattended when using this product.
- WARNING Incorrect installation can be dangerous.
- WARNING Do not use the safety barrier if any components are damaged, missing or disassembled.
- WARNING The safety barrier must not be fitted across windows.
- WARNING Never use with a child able to climb over or dislodge/open the safety barrier which may cause danger.
- WARNING Never install this product on glass doors. Install this product against reliable doors or walls.
- WARNING To prevent falls, never use this product at the top of stairs.
- WARNING If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible.
- WARNING To prevent injury, do not put any goods that can be grabbed by children or pets near this product.
- WARNING Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened.
- WARNING Ensure the product to be installed is horizontal and flat on the floor.
- WARNING This product is intended for use with children from 6 to 24 months or small to medium pets.
- WARNING Safety barriers should be checked regularly to ensure that it is secure and functioning in accordance with these instructions.
- WARNING Any additional or replacement parts should be obtained from the Customer Service Centre of the entity you purchased this product.
- WARNING Barrier must be fitted between rigid surfaces such as plaster board, timber or hardwall.
- WARNING Always check that the safety barrier is correctly closed.
- WARNING Use only with the locking/latching mechanism securely engaged.
- WARNING This safety barrier is for domestic use only.
- WARNING Never use without Wall Cups.
- WARNING This safety barrier must be fitted between a rigid surface such as doorways, walls and stair posts along with Wall Cups secured with screws.
- WARNING This safety barrier has a manual closing system.
PARTS INCLUDES
INSTALLATION
INSTALLATION NOTE
Once the gate has been unpacked, you may notice a gap at the door opening. This is normal with pressure-mounted gates and the gap will disappear when it is installed correctly.
INSTALLATION GATE PLACEMENT
The gate must be installed in a structurally sound opening. Ensure the mounting surface (wall, door frame, stair, etc.) is strong, rigid, and has an even surface. If using a gate on a stairway, it must be placed on the lowest step.
EXTENSIONS
Measure the space to be enclosed. You may need to use extensions.
- Gate with no extensions fits: 75cm – 83 cm
- Gate with 1 x 12.7cm extension fits:87.5cm – 95.5cm
- Gate with 1 x 25.4cm extension fits: 100.5cm – 108.5cm
- Gate with 1 x 12.7cm and 1 x 25.4cm extensions fits: 113cm – 121cm
Note: Only use one extension on each side of the gate. If no extensions are required, substitute the Extension Pins with the Adjuster Bolts.
INSTALLATION OPENING OR DOORWAY
- Screw Adjuster Bolts and Adjuster Screws together and then place them into mounting holes in each corner of the gate.
- Place gate in the opening and ensure the bottom rail is completely flat on the floor and Wall Cups are directly above each other. Mark the position of each Wall Cup on the wall and/or stair post.
- Stick the Wall Cups in position using the Adhesive Pads and then place gate into position. For added security, fix each cup to the wall using a small Phillips head screwdriver (not included) and the Screws provided.
- The gate must only be fixed to a solid and secure surface. If unsure, check with a qualified builder or trades person to ensure that the installation you intend is suitable and safe within the chosen location.
- Align gate with Wall Cups and tighten Adjuster Screws by turning clockwise, starting with the bottom Adjuster Screws, then tighten the top Adjuster Screws. Tighten equally until there is only a 1.5mm gap in the locking mechanism. Regularly check tension of all Adjuster Bolts and ensure the gate is secure.
- Note: Do not extend Adjuster Bolts more than 57mm.
- Note: Do not overtighten. Allow 1.5mm gap in the locking mechanism.
OPERATION HOW TO OPEN GATE
- Using one hand, place your thumb on the button and grip the Gate Panel with fingers. Slide the button across and lift the Gate Panel simultaneously.
- Open the gate in either direction. When released, the gate will swing closed automatically.
- To enable the stay open feature, open the gate to a 90° angle.
- Always check gate is properly closed when in use.
- Note: If gate is open and excessive pressure is applied, (such as standing or swinging on the gate) structural damage may occur.
MAINTENANCE
CARE INSTRUCTIONS
Simply use a soft damp cloth to wipe gate and dry thoroughly after cleaning. Do not use chemicals or abrasive cleaners.
- IMAGES/DRAWINGS IN THE MANUAL ARE FOR VISUAL PURPOSES ONLY. ACTUAL PRODUCT MAY VARY SLIGHTLY. THE MANUFACTURER RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION OR FEATURE WITHOUT PRIOR NOTICE.
- MADE IN CHINA
- CUSTOMER SERVICE:
- KMART AU: 1800 124 125
- KMART NZ: 0800 945 995
- TARGET AU: 1300 753 567
- K: 43°363°889
- T: 68°948°825
CONTACT INFORMATION
- AFTER-SALES SUPPORT:
- AU: 03 9005 0127
- NZ: 0800 945 995
- WWW.CHILDSAFETYHELP.COM.AU
- OR VISIT: CHILDSAFETYHELP.COM.AU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>