tzumi 7831BB On Air Flex Stand Installation Guide
- June 7, 2024
- Tzumi
Table of Contents
tzumi 7831BB On Air Flex Stand
Installation Instructions
STEP l: CHOOSE A SETUP LOCATION.
- This unit can be installed onto most flat surfaces, such as tables, desks, etc.
- Choose a location on the edge of a desk or table that will hold your microphone arm securely in a fixed position.
- Mount the table clamp to the edge of the table.
STEP 2: INSERT THE SUSPENSION ARM.
- Turn the knob clockwise to tighten the clamp in place.
- Insert the stand arm into the clamp. Allow about (approx. 3-4 ft.) of horizontal travel.
STEP 3: INSERT THE MICROPHONE HOLDER AND POSITION.
- Turn the knob clockwise to tighten the clamp in place.
- Insert the stand arm into the clamp. Allow approx. 3-4 ft. of horizontal travel.
Distributed by Izumi Inc. NY, NY, 10016.
©Copyright 2019 Izumi Inc. All Rights Reserved. Made In China. All other
trademarks and tradenames are the property of their respectful owners. All
pictures shown are for illustration purpose only. Actual product may vary due
to product enhancement. Subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>