Tzumi 6058 auraLED Mood Light Strip User Guide
- June 7, 2024
- Tzumi
Table of Contents
THE ULTIMATE HOME EXPERIENCE
Give your home IMng room a unique atmospheric twist with the USB LEO MOOD LIGHT by Izumi. Designed with a safe adhesive backing this colorful backlight can be fixed directly onto the back of your TV or computer screen enhancing your home theater and easing light-induced Fatigue It fits screens up to 65 and includes a wireless remote controller. which provides you with the freedom to customize your selection of 16 colors and find the perfect brightness. rhythm. and color scheme.
- 16 Color Selection
- Adjustable Color Intensify & Brightness Via Remote Control
- Relieve Eyes From Fatigue
- Create Ambiance & Unique Atmosphere
PRODUCT OVERVIEW
When Remote Control operation becomes slow, it is time to change the battery. Compatible with CR2025 and CR2032 battery types.
INSTALLATION
NOTE Please make sure that the back surface of your Pi is clean from dust oils or fingerprints before attempting to apply your LEO Mood UV Use an alcohol-based cleaning cloth to wipe the back of your TV
- Locate the USB port on the back of your TV. If your TV does not have a U59 port you may use any other USB power source
- Make sure that you are satisfied with the coverage area of the LED strip prior to peeling off the adhesive tape Make sure that the US8 cable is placed near the USB port and has enough slack to reach safely. The Remote Receiver must also be visible in order to work properly. See below.
- Peel off the backing of the strip to expose the adhesive.
- Apply to the cleaned surface of the back of W Press down to for a couple of seconds to secure.
- Connect the LEO Strip with the U58 Cable and insert the cable into the USB port.
- Once connected remove the protective plastic strip from the remote control to activate the battery.
- Press the ON button to turn on the LEO strip.
- Refer to the color comprehend settings on the remote to customize your LEO strip.
ASSEMBLY
- Connect the LED Strip with the USB Cable
WIRELESS REMOTE CONTROLS
Buttons 1 and 2 can be used to control the effects and speed of Buttons 6, Z
8, 9.
Brightness (UPI / Flash Control (QUICKI- Brightness (GOWN) / Flash Control (SLOW)
- Power OFF.
- Power ON
- LEO color buttons 16 colors
- Flash (Changes Instantly) Red > Green > Blue
- Strobe (Changes Gradually) Red > Green > Blue
- Fade (Changes Gradually) Red > Green > Blue > Yellow > Light green > Purple > White
- Smooth (Changes Instantly) Red > Green > Blue > Yellow > Purple > Light Green > White
SPECIFICATIONS
Wireless Remote Control
Coverage area: up to 26 feet (8m) max Battery type: CR2025 cell battery
ABOUT THE AURA LEO APP
Download the AURA LED App From either the Google Play Store or the Apple App Store. From there, you can control your LED strip anywhere directly from your phone or tablet.
- Allows you to choose from a wide range of 16 colors
- Enables you to save default settings such as favorite colors and illumination patterns
- Enables you to match the rhythm of any of your own music or online streaming audio.
- Can also sync LEO illumination with your voice in the app’s microphone voice detection feature
- Lets you to set custom light-activated alarms and sync to your schedule and lifestyle.
USING THE AURA LED APP
- Download the Aura LED App from the App Store or Google Play Store
- Open the app and select an option from the menu in the upper left-hand corner of your screen.
- The LED strip will appear on your screen. You can now control the LED strip.
- Tap on the link icon to connect or disconnect a specific LED strip.
- Use the bottom navigation buttons to manually adjust colors. illumination style/pattern, and control the lights with your music or voice.
SPECIFICATIONS
LED Stria input: DC 5V/0.5A-2A
Power Consumption: 2.5w – IOW
LED chip: 5050. RGB
Color:16 colors with 14 Mood light settings
Beam Angle:120 degrees
LED strip: 30 LED lights / 65 foot (781 Back adhesive 3M self-adhesive
Working temperature: -20°C 11145°C
Working Humidity: 0%11180%
RH Usage: 40.000 hours
IMPORTANT SAFEGUARDS
- Keep LEO strip away from flammable objects
- Always make sure that all parts have been connected properly to avoid short circuits.
- Check to make sure the voltage of the power source IUSEil Is 5V.
- Do not connect the LED strip to the power source until all of the Installation has been completed.
- Do not cut any part of the LED strip or Its connectors.
- Always make sure that the Remote Receiver Is not covered or blocked. This will ensure proper operation using the remote control.
- If this product malfunctions. please do not try to repair It yourself take It to a qualified electrician.
Tzumi ®LED™Mood Light wlApp. Distributed by Immi Inc. NY, NY, 10016. @Copyright 2018 turn. All Rights Reserved. Made In China. Samsung and Galaxy S we both registered trademarks of Samsung Electronics Co.. Ltd. All pictures shown are for illustration purposes only. Actual product may vary due to product enhancement Other trademarks and trade names at this package are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>