ALGO 8036 SIP Multimedia Intercom User Guide
- June 7, 2024
- ALGO
Table of Contents
** 8036 SIP Multimedia Intercom
QuickStart Guide**
There are THREE key steps to getting up and running with your new 8036 SIP Multimedia Intercom
Network Setup
- Set up a SIP account on your server so that the 8036 can receive calls (you may have to enlist your network administrator’s help here).
- Plug your 8036 into your PoE network. After a few seconds, the device’s Welcome screen will display (below).
-
Note the IP address displayed and enter this into your PC’s web browser to display the 8036 Control Panel. Login with the default password (“algo”)
1 Apart from the physical installation which is covered separately in the 8036 Install Guide. -
Once logged in, go to Settings>SIP and enter your SIP account details including SIP domain, User (Extension), and Authentication password.
Create a User Interface Page
-
Go to User Interface>Create Pages
-
Create one new button page, then click Add Pages.
Configure User Interface Page
-
Scroll down to List Pages and click on Page 1 to expand the settings available.
-
Enter the settings as shown in the above image.
-
For the Dialing Extension field, enter the extension you would like the 8036 to call when the button is clicked.
-
When finished, click Save All Pages, after which the 8036 UI will restart.
-
After restarting, the 8036 will display your first User Interface screen.
-
Touch the button you created to make your first 8036 phone call.
-
Now try experimenting. Add some more pages with different layouts. Try different button actions (e.g. set a Goto action to a Dialer page). Soon you will get a UI that will suit your application.
****Algo Communication Products Ltd.
4500 Beedie Street
Burnaby, BC Canada V5J 5L2
www.algosolutions.com