UMIDIGI Urun S Smart Watch Built In GPS Activity Tracker Instruction Manual

: June 7, 2024
: Umidigi

Table of Contents

UMIDIGI Urun S Smart Watch Built In GPS Activity Tracker
Instruction for Use
Bind process
Main interface operation
- Function Introduction
Cleaning and Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

UMIDIGI Urun S Smart Watch Built In GPS Activity Tracker

Thanks for choosing UMIDIGI products!
We will always focus on innovation and continue to provide high quality smart devices for better user experience. Please leave us review of feedback if you like it, we do appreciate.

Key definition

Instruction for Use

Charging schematic

Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time. instruction
1

Tip : Wearing too loosely may affect the accuracy of heart rate data.

Bind Watch

Download and install App
You can set up the watch through the Pair active app for iOS or Android devices. The steps are shown as follows:
Notes : The hardware platform of the equipment system shall meet requirements.

Bind process

bind process

please charge to activate the watch before you use it.
In the watch, enter the Settings about watch View Bluetooth address.
Bind Watch
Turn on the Bluetooth on your mobile phone
Open “Paiactive” APP, register, add device.
Select product model: Urun S
Click the next step
Select watch Bluetooth address
Show successful addition.
Click to view now to enter the operation interface.

Notes:

During binding process, Paiactive will prompt you to enable GPS and Bluetooth, and authorize “Paiactive” to get access to the GPS on your mobile phone.
After binding the Apple phone, you need to pair the Urun S watch with the phone’s Bluetooth so that the watch can provide various information.

Synchronous Data

The data is synchronized in real time. and the sports mode can save a piece of sports information shown as follows: data

Main interface operation

Swipe the screen to enter different interfaces. Swipe down: Shortcut interface operation 1

Function Introduction

function 1 function 2 function
3

Notes : For more functions and operation, please check the Paiactive software of the mobile phone.

Start sports

Enter sports
Click the sports icon select the sports type>enter the sports automatic timing.
During sports
Pause motion: Long press the key, prompt pause/restore, click
Restore Exercise: Click to resume exercise
Stop exercise: Remind whether to end this exercise Select Yes

Heart rate test

Note : Please wear the strap tightly to test accurately when testing heart rate.

Product Parameters

Model	Urun S	Screen type	1.1-inch color screen
Battery capacity	280mAh	Charging voltage	5V±0. 2V
Charging time	about 2.5 hours	Battery life	7-15days
Waterproof level

5ATM

NO

| sensor| Accelerator sensor Geomagnetic sensor Optical heart rate sensor
Range of charging temperature: 10℃-45℃

Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.

Waterproof: Not suitable for diving, swimming in the sea, or sauna. But suitable for swimming in swimming pool or in shower (cold water) and shallow beach.

Cleaning and Maintenance

It is recommended to wear and maintain according to the following three points:

Keep the product clean;
Keep the product dry;
Do not wear it too tight.
Do not use household cleaners to clean the watch, but use the soap free detergent. It is recommended to use alcohol to scrub stains that are not easy to remove.

Frequently Asked

Mobile APP search for the watch failed
It is recommended to restart Bluetooth after restarting the phone, and then connect.
Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above.
The watch received no alerts, text messages
You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
The phone needs to be paired with the watch via Bluetooth.
You need to keep your watch connected to Bluetooth.
Note : The watch information prompt and caller ID are not supported by Android phones. iOS system mobile phone support.
Bluetooth is often disconnected
If the distance between the watch and the mobile phone is too far, the connection effect of more than 10m bluetooth is obviously weakened.
Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connection signal.
Whether the bluetooth function of the mobile phone is abnormal.
How to restart: Restart mode: long press the key, prompt whether to restart/shut down, select restart。
Do I need to keep my bluetooth on when I wear my watch?
For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone.
How to set the watch time
After opening the APP, opening the Bluetooth and connecting the watch, the time will be automatically synchronized. More detailed questions can be answered with help and feedback in the APP.

Safety and Product Information Notes

Battery warning
Do not disassemble, bore or damage the battery. Do not disassemble the built- in batteries of non-replaceable battery devices. Do not use sharp objects to remove the battery.

Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitoring strap.

The optical heart rate sensor of the watch glows green and blinks. If you have epilepsy or are sensitive to flashing light sources, please consult your doctor if you can wear this product. The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities. such as steps, sleep, distance, heart rate and calories, but may not be completely accurate. The device, accessories, heart rate sensors and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.

Cycling Warming

Please maintain good judgment at all times and ride in a safe manner. Make sure your bike and hardware are properly maintained, .The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty. Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry When your heart rate is measured, keep your arm still during the test.

Caution
Rise of explosion if battery is replaced by an incorrect type dispose of used batteries according to the instructions.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.