VIVO Black 47 Inch Pneumatic Desk Instruction Manual
- June 6, 2024
- Vivo
Table of Contents
Black 47 Inch Pneumatic Desk
Black 47″ Pneumatic Desk
Instruction Manual
SKU: DESK-V048GB
Scan the QR code with your mobile device or follow the link for
helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v048gb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
|
www.vivo-us.com
Chat live with an agent!
|
---|---|---
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
|
---|---
DO NOT
place hands on or near support bars. Moving parts can crush and cut. Pinch
points are created during lifting and lowering the worksurface. Failure to
follow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
NOTE: To prevent possible injury or damage to equipment and your surroundings, never press or use the release paddle during installation.
ASSEMBLY STEPS
STEP 1
Place the support frame (C) upside down on a flat surface. Insert the column
set (A) into the support frame as shown, and secure using eight M6x10 bolts
(F) with the 4mm Allen wrench (H). The mounting plates on the columns should
be facing towards the back of the frame (arrows on sides of frame indicate
front).
STEP 2
Assemble the feet (E) to the columns using M6x10 bolts (F), making sure the
long ends of the feet are facing towards the front of the frame. Tighten with
the Allen wrench (H).
STEP 3
Loosen the bolts on the back of the columns so at least 5mm of thread is
exposed. Hang the stabilizer bar (B) over the bolts and secure with M6x10
bolts (F). Tighten all bolts with the Allen wrench (H).
STEP 4
Place the desktop (D) on the assembled frame. Secure the desktop using M6x10
bolts with a Phillips screwdriver, then secure the release paddle using M6x14
bolts (G).
STEP 5
Lift the release paddle to raise or lower the desktop.
If the release paddle is loose, tighten the knob in back until the desk is
able to adjust when the paddle is lifted. Tighten the nut against the knob to
prevent the knob from loosening.
| 
---|---
Do not exceed desk weight limit.
|
Keep area of vertical motion free of obstacles.
|
Keep weight on desk balanced for correct operation and longer life of components.
|
Leave enough slack in cables to allow for full range of vertical motion.
Failure to follow these instructions may result in property damage and/or personal injury. 7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 03/04/2020
Open
Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
---|---
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- DESK-V048GBPneumatic Spring Height Adjustable 47” Desk – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>