AUKEY LC-A3 3-in-1 Wireless Charging Station User Manual

June 6, 2024
Aukey

AUKEY logo

User Manual
3-in-1 Wireless Charging Station

Model: LC-A3
Aukey Technology Co,.Ltd
www.aukey.com 
support@aukey.com
Room 102, Building P09, South China City
Electronic Trading Center, Longgang District,
Shenzhen, Guangdong, 518111, CN

AUKEY LC-A3 3-in-1 Wireless Charging Station - icon

Thank you for purchasing this AUKEY product. Please read this user manual carefully and keep it for future reference.

Package Contents

3-in-1 Wireless Charging Station
USB-A to C Cable (1.2m)
User Manual
Warranty Card

Product Diagram

AUKEY LC-A3 3-in-1 Wireless Charging Station - FIg 1

a. Charging coil
b. Wireless charging surface
c. Apple Watch charger mount
d. LED indicator
e. USB-C input port

Specifications

Model LC-A3
Technology Qi, Quick Charge 3.0
USB-C input 5V / 3A, 9V / 2A (Max)
Stand wireless output 10W / 7.5W / 5W
Secondary wireless output 5W
USB-A output 5V 1A
Dimensions 193 x 93 x 130mm
Weight 270g

Assembly

AUKEY LC-A3 3-in-1 Wireless Charging Station - FIg 2

*If you don’t have an Apple Watch, please skip ①③④⑤⑥⑦.

AUKEY LC-A3 3-in-1 Wireless Charging Station - FIg 3

AUKEY LC-A3 3-in-1 Wireless Charging Station - FIg 4

Getting Started

  1. Connect the wireless charging station to a wall charger via the USB-C port
  2. Place a Qi-compatible mobile device on the phone stand
  3. Place an AirPods wireless charging case on the secondary charging surface
  4. Place an Apple Watch on the detachable mount
  5. When the devices are fully charged, you can remove them

LED Indicator Status

Standby Blue
Charging Green
Foreign Object Detected Flashing blue & green

Note

  • Use only certified chargers that support QC 3.0 fast charging (5V / 3A, 9V / 2A).
  • Unauthorized chargers may cause damage or the wireless charger may malfunction.
  • Do not place foreign objects, particularly metallic or magnetic objects, between the device and the wireless charger.
  • The wireless charger is compatible with Wireless Power Consortium (WPC) certified devices.
  • If your device isn’t charging properly, try adjusting the position to better align the charging coils.
  • Cases under 3mm thick can be kept on, but thick cases or cases made of metal need to be removed.
  • The maximum operating temperature of this product is 40 ℃.

Product Care

Keep away from liquids and extreme heat

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.

Amazon US orders: support.us@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders: support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com

*Please note, AUKEY can only provide after-sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals