Yecaiyuan POL-Y01 Permanent Outdoor Eaves Light User Manual

Product Name: Permanent Outdoor Eaves Light

Product Parameter:

strips, every led bead can be controlled independently
Operating Temperature| -4°F~140°F (-20°C~60°C)
Accessories| Name| Specification| Quantity| Remark
---|---|---|---|---
| String lights| 36V-5M -12LEDs/Strip Total length: 30M| 6| Wire length between two LEDs: 400mm Length of input & output wire: 200mm
| Controller| 1056028mm| 1| Length of power cable: 295cm
| Power adapter| Working voltage: 36V| 1| Plug wire length: 70cm Cable length connected to the controller195cm
| Mounting clamp| Length: 33mm width:21mm| 10Pcs|
| Clip| 20.32*27.94inch| 24Pcs|
| Gum| Diameter: 30mm| 12Pcs|

Easy toinstall

1. Clean the surface with a cloth or tissue before installing the string lights.
2. Tear off the VHB gum on the back ofthe light.
3. Press the light firmly against the surface for more than 5 seconds.
4. Connect 2 string lights via the waterproof connectors and screw in the cap.
5. Please install the string lights 1.91-3.94 inch away from the wall surface.
6. Attach 4 screw clips to each stringight to keep them secure.

Wire Connection

Short press: Turn on or transfer the Buit-in modes
Long press: Hold on 3 seconds-turn off Hold on 8 seconds-restore factory Settings
The connection between the controllerand the powersupplyControllerand device connection

Download Surplife APP

Download “Surplife” APP from Apple Store and Google Play Store, orscanthe QRcode.

https://faqsys.magichue.net:4489/wifi/page/download/surpLife

How to connect the controller to Wi-Fi network?

1. Register/Login your Surplife account.
2. Open your phone Bluetooth, turn on the device.
3. Enter “Surplife” app, tap “Add Device” or click “+” to add the device. Then select your Wi-Fi network(Only works with 2.4Ghz network), enter the password.
4. The device name can be modified and select the room after connecting to Wi-Fi network.

About Settings:

1. n the setting interface, you can set the IC model, color correction, nuimber of points(Total number of points can not exceed 300 in each segment and total LED chips quantity can notexceed 2048)
2. The setting of IC numberis applied to the smearing function

Detailed introduction of APP functions:

1. Multi color function
   The color of the light can be adjusted by the whole and each segment. APP provides different columns for color selection or editing, and the brightness can also be adjusted. Inthe segmentation interface, users can freely smear or erase the color of each segment, and also set the gradient effect.

2. Scene settings
   There are Four Build-in scenes: ” Life’, ocenery “Festivals”, “Mood”, and click DIY’ or Collection to create your favorite light effect.

3. Playlist mode
   Multiple light dynamic modes builtin, can set the time of Hehting effects and enter cycle mode.Select different scene modes, then set the duration of each scene respectively, and play it by combining the sequence of different lighting effects.

4. Smear function
   Click “+” to DIY the lighting color and dynamic effects then save it.
   Before DIY, please set the number of IC in “Settings” to ensure that the number of lights is consistent with the device, Otherwise, the lighting effect isincorrect. Before customize, please ensure that the IC number in app setting isthe same asthe light device, otherwise, the lighting effect will be incorrect.

5. Music Mode
   1.Synchronization function of lighting and music rhythm.
   Click “Add Music” >Importa music file orimport it from the built-in music library. 2.MIC
   The lights color will change with the sound rhythm when your phone microphone catches the sound. The microphone sensitivity can be adjusted by the slider.There are two ways to input the audio signal on the controller, built in APP microphone and external microphone(Forsound control version).

6. Light timer
   Smart lights automatically come on and off at given times through the timer function, choose your favorite effect and color then save it.

7. Group Control
   This mode allows you to create different groups to control more than one controllers at the sametime.![Yecaiyuan POL-Y01 Permanent Outdoor Eaves Light

• parts26](https://manuals.plus/wp-content/uploads/2023/12/Yecaiyuan-POL-Y01 -Permanent-Outdoor-Eaves-Light-parts26.jpg)

  8. Link
     Setting a group forthe strip lights, enjoy the linkage lighting effect. Hold and drag the device on the list to change the order and the direction.

1. The grouped light strips synchronized Linkage
2. The grouped light strips change sequentially

9. Apple lOS system widget added (also supports Android phones)
   Steps:
   1. Create a scene for your light, andadd acommand for him when you use the widget.2. Enterthe page”Profile”

   Tap”Widget” >Add the scene to Widget.Then Add “Surplife” app to Widget

10. Siri Shortcuts-lOS
    Note:
    1. Siri only can control the scene.
    2. 10S 12.0 and above systems have their own shortcut function. 3.Pls make sure your deviceis “Cloud Online”.3. Enter the page”Profile”

    Tap”Siri Shortcuts” > Add the scene to here.4. Ask Siri: Turn on the {Scene Name)

11. Third-party platform
    You can choose the third-party voice service platform (Alexa, Google Home, Tmall Genie, etc.) and bind the platform according to the guidance. After the connection is successful, you can start the voice control, which is convenient and fast.

Attentions

a) Please use the product in a dry environment.b) For input voltage, please use the DC yortage within the specified range as instructed in the manual, must not connect into 220V AC directly.c) The product is requested common anode connection. The wrong connection will cause a malfunction.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>