Aukey MC10 Qi2 Magnetic Wireless Charger User Manual

Aukey MC10 Qi2 Magnetic Wireless Charger

Product Information

Specifications:

• Model: MC10
• Dimensions: 90 x 65mm
• Ratio: 1:1
• Weight: 128g
• Manufacture Date: 2024.03.08
• Charging distance: mm
• Conversion: %
• NW.: g

Product Usage Instructions

Connect to Power Adapter:

1. Connect the power adapter to the socket.
2. Connect the adapter to the Type-C interface.

PD wall charger needs to be purchased separately. Please use the connector adapter according to your wall charger’s USB output port.

Charging Mode:

1. Make sure the wireless charger dock is connected to the power supply.
2. Place the magnetic wireless charging phone on the charger; they will align automatically.
3. The device also supports wireless charging for other non-magnetic wireless charging function devices.

Notes:
The included images are sketch maps; the final product may vary based on the material. Includes: wireless charger, user’s manual.

FAQ

• Q: Does the wireless charger support fast charging?
  A: Yes, the wireless charger supports fast charging when used with a compatible PD wall charger.

• Q: Can I charge non-magnetic devices on this charger?
  A: Yes, the device supports wireless charging for other non-magnetic devices that have wireless charging functionality.

Thanks for choosing us！

• This is a smartphone wireless charger that allows you to enjoy the fun of digital products easily.
• Please kindly read the user manual before using it and keep it for future reference.

Specification

• Input: 5V=3A, 9V=2.22A, 12V=1.67A
• Output: 5W/7.5W/15W
• Frequency: 110-205KHz
• Dimension: Ф58.6 X 7.3mm
• Charging distance: ≤10mm
• Conversion: ≥72%
• NW.: 50g

Connect to the Power Adapter

1. Connect the power adapter to the socket.
2. Connect the adapter to the Type-C interface.

20W PD wall charger needs to be bought separately, please use the connector adapter according to your wall charger USB output port.

Charging Mode

1. Make sure the wireless charger dock connects to the power supply.
2. Put the magnetic wireless charging phone on the charger, they will align automatically.

The device also supports wireless charging to other nonmagnetic wireless charging function devices.

Important Notes

1. Do not squeeze or collide.
2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
3. Do not use wireless chargers in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomena.
4. Do not place too close to a magnetic stripe or chip card ( ID card, bank cards, etc. ) to avoid magnetic failure.
5. Please keep a distance of at least 20cm between implantable medical devices ( pacemakers, implantable cochlear, etc. ) and the wireless charger, to avoid potential interference with the medical device.
6. To take care of the children, to ensure that they won’t play the with wireless charger as a toy, to avoid unnecessary accidents.

The involved images are sketch maps, the final product as per the material subjects.

Includes:
wireless charger, user’s manual.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimetres from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, is the device shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>