KIMILAR Replacement Wired Infrared IR Ray Motion Sensor Bar Compatible-Complete Features/User Innstruction

KIMILAR Replacement Wired Infrared IR Ray Motion Sensor Bar Compatible

Specifications

• Product Dimensions
  9.5 x 2.5 x 1 inches

• Item Weight
  1.44 ounces

• Hardware Platform
  Nintendo_wii

• Color
  Basic

• Brand
  KIMILAR

Introduction

If your original sensor bar is missing, broken, or damaged, the KIMILAR compatible sensor bar may be used with Nintendo Wii and Wii U consoles. it works similar to the original sensor bar, it is easy to install and does not require batteries or a power converter. A transparent stand is included with the motion sensor. The sensor bar can be mounted either above or below the television. All Wii controllers, including Wii U controllers, motion plus controllers, and other Wii controller addons, are compatible. Wired consoles are compatible with this wired infrared sensor bar. Includes an adhesive- backed stand for mounting to a television, monitor, or another smooth surface. The Wired console is not included. The sensor bar may be easily placed thanks to the over 7ft wire. 9.4-inch sensor bar length Wired or Wired  U replacement or additional sensor It’s simple to set up and play right away. Silver / Black in color.

What’s In the Box?

• 1 x Infrared Sensor Bar (with Clear Sensor Bar Stand)

Features

If your original sensor bar is missing, broken, or damaged, the KIMILAR compatible sensor bar can be used with Wii and Wii U consoles. it works similar to the original sensor bar, it is easy to install and does not require batteries or a power converter. A transparent stand is included with the motion sensor. The sensor bar can be mounted either above or below the television. All Wii controllers, including Wired U controllers, motion plus controllers, and other Wired controller addons, are compatible.

Is it possible to utilize any sensor bar with the Wii?

By using a separate source of infrared light, you may operate your Wii system without the sensor bar. At each end of the sensor, bar are two infrared light sources that serve as a reference point for your Wii Remote. The sensor bar doesn’t send any information to the console.

Frequently Asked Question

• Should there be a light on the sensor?
  This does produce ultraviolet light, but your eyes can’t see it. If you look at it through a cellphone camera you will see if it’s on or not.

• Does this work with wii remotes with wii motion plus?
  Yes. It works perfectly.

• Does it supposed to only emit 3 infrared lights unlike the 5 infrared lights in the original Nintendo sensor bar because I did the camera test
  There are 6 infra red lights in our product. Three on the left and three on the right.

• Does the wii immediately recognizes it? And what about the controllers?
  The wii did recognize it as soon as I plugged it in. I don’t think that I had to reset the controllers. It’s easy anyway.

• Does this work with the Just Dance games where you don’t have to hold the controller?
  Yes it does

• Just purchased and not working and no plastic is on it. What do I do?
  If it doesn’t work then return it! Mine works perfectly fine.

• can you splice wire to extend it another 10ft?
  I broke the original cable, and when I tried to repair it (with a splice) it did not work. There are several wires, and an aluminum wrap, and a ground wire, it was not possible for me to fix the wire. That is why I bought a new one.

• Will this work with wii fit plus?
  Yes it should work.

• Can you use it with a normal remote or does it work only with Wii?
  Not too sure but Wii and Wii u work well. Have a good day.

• Do you need a flat-screen tv to use this?
  I’m using it for an original WII player that I’m streaming Netflix through. The TV I’m using is a non-HDTV old cathode ray tube model from 2001. Everything works fine. I’m only aware of this product working with WII players. If it can be used for something else besides WII I have no knowledge of it.

• Do you need a sensor bar to play Wii games with Wiimotes?
  Some games can be played with just the controller. Games that need to track movement like Wii sports bowling, tennis, and so on need the bar to track you.

• Is this a receiver for controllers?
  Yes, this is the Wii sensor bar for the controller’s movement tracking.

• Why did I receive an HDMI cable instead of the wireless sensor bar?
  Did you order the wrong item? The sensor bar is not wireless if you’re ordering for the Wii.

• I can’t get this product to work, are there any tips or tricks anyone can suggest? Thanks
  as long as your plugin and place it in the right location for the controllers to pick up the sensor they work fine. You May have to adjust your position/ location on the bar.

• Does this work for Wii mini to?
  It should since they use the same type of connection should work without any problems

• So I just got this today and it doesn’t work. I plugged it in too. Is there something im missing?
  No, nothing is missing mine worked out just fine. Maybe you should contact the company for an exchange.

• Does this work with the dolphin emulator?
  As long as it requires basic capabilities from the sensor like the original you should not have any issues!

• Is it compatible with the first wii model?
  Yes, I have also purchased this for the first Wii model & it works fine with me! You’ll be delighted w/ your decision, Take care.

• What is the range/sensitivity of this?
  The range is pretty good, at a minimum of 10ft.

• Will it work with a blue Wii game console?
  I am not sure; I have a regular Wii.

• What does it plug into?
  Plugs into the Wii. Direct replacement for the original. All the sockets on the Wii back are unique so it’s hard to get them wrong.

• does it pick up sound?
  It’s a sensor, which means that it will pick up motion and the wii remote pointing at the tv. It doesn’t pick up sound.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>