AUKEY EP-M1S True Wireless Earbuds User Manual

AUKEY EP-M1S True Wireless Earbuds

Thank you for purchasing the AUKEY EP-M1S True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number.

Package Contents

• True Wireless Earbuds
• Charging Case
• Silicone ear tips (S / M / L, M come attached to the earbuds)
• USB-A to C Cable
• User Manual

Product Diagram

Specifications

Earbuds

Charging Case

Getting Started

Charging
Fully charge the charging case before the first use. To charge, connect the case to a USB charger or charging port with the included USB-A to C cable to charge the charging case. When the LED charging indicator on the outside of the case changes from flashing blue to solid blue, the case is fully charged. Charging may take 2.5 hours, the case can offer full charge to the earbuds 3 times. The earbuds should be stored in the case when not in use.

Note

1. Remove the protective film from the earbuds when using them for the first time.
2. Using an adapter with an output voltage higher than 5V may not charge the battery or damage the device.

Turning On / Off

Turn On| Open the lid of the charging case and take both earbuds out, the earbuds will automatically power on. To manually power on, tap and hold the touch-sensitive panels for 3 seconds until the LED indicator flashes blue and the voice guidance says “power on”.
---|---

Turn Off

| Return both earbuds to the charging case and close the lid, the earbuds will automatically power off. To manually power off, tap and hold the touch-sensitive panel for 10 seconds until the LED indicator flashes red and the voice guidance says “power off”. When the earbuds are not worn for about 5 minutes after being removed from the charging case, the earbuds turn off automatically.

Pairing
Starting with the earbuds in the case:

1. Open the lid of the charging case and take both earbuds out, they will automatically turn on, indicators on both earbuds will flash red and blue alternately, and then enter pairing mode, the slave earbud indicator will be off.
2. Turn on the pairing function via BT on the device you want to pair with the earbuds
3. From the list of available devices, find and select “AUKEY Move Mini S”. After the connection is successful, the master earbud indicator will be off.

Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Open the lid of the charging case and take both earbuds out, then both earbuds will turn on and connect with each other automatically
• To turn off, put the earbuds back in the charging case and close the lid, They will begin charging.

Using the Left / Right Earbud
Starting with the earbuds in the case:

1. Take the left/right earbud out
2. Turn on the pairing function on the device you want to pair with the earbud
3. From the list of available devices, find and select “AUKEY Move Mini S”

Note
When you turn on the earbuds, they will be automatically reconnected to the previous-paired device or enter pairing mode if no paired device is found Either left or right earbud can be used individually once connected to your device when you keep the other one inside the charging case The wireless operating range is 10m (33ft). If you exceed this range, the earbuds will lose connection with your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes. Or the earbuds will be switched off automatically after 5 minutes

Reset the earbuds

1. Cancel the Bluetooth pairing of the phone or computer and the Earbuds.
2. Quickly tab the touch keys on the left and right earbuds 5 times, and this will clear the pairing records on the device.
3. Put them back into the charging case to charge, then take out the earbuds for re-pairing and connecting.
4. If the reset is unsuccessful, repeat the above steps.

Controls & LED Indicators

Streaming Audio
Once paired, you can wirelessly stream audio on your device via earbuds. Music will automatically get paused when you receive an incoming phone call and will be resumed once the call ends.

earbud
Skip to the next track| Double tap the touch-sensitive panel on the right earbud

Taking Calls

Reject an incoming call or End a call

| Long-press the touch-sensitive panel on either earbud for 2 seconds

Activate Siri or other voice assistants

| Triple-tap the touch-sensitive panel on either earbud

LED Indicator (for case)

FAQ

The earbuds are on, but not connecting to my device For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual. I’ve connected the earbuds with my smartphone but can’t hear any sound Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the
audio can be transmitted. If you’re using a music player or other device, please
make sure it supports the A2DP profile.

• The sound isn’t very clear or the caller can’t hear my voice clearly
  Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range- related issues.

• What’s the wireless range of the earbuds?
  The maximum range is 10m (33ft). However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.

• The earbuds won’t turn on
  Try cleaning the charging pins and then charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address is given in ‘Warranty & Customer Support.’

• I put the earbuds back in the charging case, but the earbuds are still connected.
  The charging case is probably out of power. Try charging it.

Product Care & Use

• Keep away from liquids and extreme heat
• Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss
• Regular cleaning is recommended to prevent issues with charging

Warranty & Customer Support

For questions, support, or warranty claims, please contact your seller directly. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable conditions without restriction.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment

References

• AUKEY Official | Unlock More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>