AUKEY DH10 Three in One Charger Instructions
- June 3, 2024
- Aukey
Table of Contents
DH10 Three in One Charger
Instruction Manual
Three in one charger
Product Description
This product is a Three in one charger. This product has a rotatable port for charging the phone. At the same time. a fixed interface is used to charge the headset. The watch supports wireless charger. ergonomic point of view, Easy to view at any time. The button controls a circle of lights at the bottom, which does not affect sleep at night. Support QC3.0 protocol Fast charging adapter.
Product Parameters
Name: Three in one charger
Color: White/Black/Blue/Pink Product Size: 150’121′1108.6mm Product
Weight:186g
Input Power:5V/3A 9/2A
Mobile Phone Output: 10W/15W
TWS Output: 5W
Watch Output: 2.5W
Material: ABS+PC
Product Description
1. Mobile Phone Charging Interface
2. Headphone Charging Port
3. Wireless Charging Watch
4. Light Switch
5. Lamp
6. Power Input
7. Mobile phone holder
Instructions For Use
- Connect the USB-A port of the data cable to the 5V/3A 9V/2Aadapter (the output power of the mobile phone will be insufficient if the adapter is less than 3A).
- Mobile phone charging stand· The mobile phone is directly inserted into the mobile phone stand to enter the charging state
- Headphone charging stand The earphone is directly inserted into the earphone stand to enter the charging state,
- Watch wireless charging stand The watch can be placed directly in the wireless charging area of the watch.
Precautions
- Before using the product, please read the instructions carefully for proper use and storage..
- Without permission, do not disassemble the product or change the actual use of the product.
- When using this product, please keep away from water or other liquids that may cause short circuit.
- Please use this product in the temperature range of 10° 45°,and do not use this product near the fire source.
Light Mode
- Turn on the power and the light will enter the default always-on mode
- Press the button, the light enters breathing mode.
Press twice to turn off the light.
Packing List
- Machine X1
- 09B-C X1
- Instruction Manual X1
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o ffand on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
FCC ID: 2A4HE-DH
Documents / Resources
|
AUKEY DH10 Three in One
Charger
[pdf] Instructions
DH, 2A4HE-DH, 2A4HEDH, DH10 Three in One Charger, Three in One Charger, DH10
Charger, Charger
---|---