Tribit BTHA1 True Wireless Earbuds User Manual
- June 6, 2024
- Tribit
Table of Contents
- Tribit BTHA1 True Wireless Earbuds
- Package Contents
- Product Parts
- How to Replace the Ear Tips
- How to Wear the Earbuds
- Power ON / Power OFF
- Bluetooth Connection Instructions
- Button Functionality
- Earbud Indicator Light Patterns
- Charging Case Battery Display
- Charging Guidelines
- How to Reset the Earbuds
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Tribit BTHA1 True Wireless Earbuds
Package Contents
- Earbud ( L/R) + Charging Case
- Ear Tips (4 Pairs)
- USB-C Charging Cable
- User Manual
- Thank-you Card
Product Parts
How to Replace the Ear Tips
How to Wear the Earbuds
Power ON / Power OFF
The first time you use the earbuds, remove the insulation sticker and place the earbuds into the charging case. Then remove the earbuds from the charging case and they will be on automatically.
Power On
Remove the earbuds from the charging case.
Please tear off the insulation sticker.
Power Off
Put the earbuds back into the charging case.
Bluetooth Connection Instructions
-
Connect the earbuds to a Bluetooth device
Take out the earbuds from the charging case and the earbuds will automatically enter Bluetooth pairing mode. Open the Bluetooth menu on your Bluetooth device and refresh the Bluetooth device list, then select the audio device named “Tribit FlyBuds NC”to begin pairing. The earbuds’ indicator light will go off after successful connection.
-
Connect the earbuds with other devices as follows
Disconnect the currently connected Bluetooth device, and the earbuds automatically enter Bluetooth pairing mode.
Button Functionality
-
Play/ Pause Music:
Press twice on the Left/ Right Earbud -
Answer/ End a Call:
Press twice on the Left/ Right Earbud -
NextTrack:
Press 3 times on the Left/ Right Earbud -
Reject an Incoming Call:
Press and hold for 2s on the Left/ Right Earbud -
Activate the Voice Assistant:
Press and hold the touch button of the left earbud for 2s and you’ll hear the tone prompt, then release the button.
Noise Canceling ON➔ Ambient ON➔ Ambient OFF (default mode):
Press and hold the touch button of the right earbud for 2s until you hear the
tone prompt, then release it. ( Keep doing this to cycle through the options)
Earbud Indicator Light Patterns
- Power On: The white light flashes twice quickly, then goes off.
- Bluetooth Pairing: The white/ orange indicator lights flash alternately.
- Connection Successful: The white indicator light and orange indicator light turn off.
- Low Battery: The orange indicator light flashes twice every 4 minutes.
Charging Case Battery Display
- Earbud charging status indicator
The left and right indicator lights of the charging case show the charging status of the left and right earbuds respectively. The indicator lights fiash during the charging process and go off once the earbuds are fully charged.
Charging Guidelines
-
To charge the earbuds: Put the earbuds into the charging case to start charging.
Charging time of the earbuds: about 90 minutes.
Charging indicators lights of the earbuds: The white indicator light of the earbuds fiashes and goes off when the earbuds are fully charged. -
To charge the charging case: Plug one end of the USB cable into the SV power supply and the other end into the charging port of the charging case for charging.
Charging time of the charging case: about 90 minutes.
Charging indicator lights of the charging case: The 4 indicator lights flash while charging, and stay on when the charging case is fully charged.
How to Reset the Earbuds
-
If the earbuds are not functioning normally
Put the earbuds back into the charging case. When the white indicator light of the earbuds fiashes, they have been reset successfully, and you may take out the earbuds. -
Disconnect the earbuds from a Bluetooth audio device
Take out the earbuds from the charging case, and simultaneously tap the left and right earbuds 6 times, quickly. After the white light flashes
3 times, the white light of the left earbud will go off. When the white indicator light and orange indicator light of the right earbud alternately flash, the earbuds enter Bluetooth pairing mode. If your Bluetooth audio device has connected with the earbuds, delete the old pairing records for reconnection. -
Pair the left and right earbuds
Please take out the earbuds from the charging case and disconnect the earbuds from the Bluetooth device. When the white indicator light and orange indicator light of the earbuds flash quickly and alternately, double-tap the touch buttons of the left and right earbuds. The white indicator lights of the left and right earbuds flash once every second to enter the pairing state. After the left earbud has been close to the right earbud for a few seconds, the white indicator lights of the left and right earbuds will turn on for 5 seconds and then turn off, indicating successful pairing.
Note: When the left and right earbuds lose connection.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communication.
However, there is no guarantee that interference won’t occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. Users are encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit that is different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>