Tribit BTH92 True Wireless Earbuds User Manual
- June 6, 2024
- Tribit
Table of Contents
Learn more about the EU Declaration of Conformity, please click the below link to download. http://files.tribitaudio.com/c01-2101 n-01-uk-doc.pdf
Tri bit FlyBuds 3
True Wireless Earbuds
Model: BTH92
Package Contents
Product Parts
How to Replace the Ear Tips
How to Wear the Earbuds
On/Off
The first time you use the earbuds, please tear off the insulation sticker.
Then place them in the charging case and close it.
Bluetooth Connection Guidelines
• Connect the earbuds with a Bluetooth device
Open the top cover of the charging case, and the earbuds will automat ically
enter Bluetooth pairing mode. Open the Bluetooth function in the Bluetooth
device, refresh the Bluetooth device search, and click the audio device named
“FlyBuds 3” to connect. After successfully connecting, the earbuds indicator
will go off
• The two ways to connect with other devices are as follows:
- Please disconnect the earbuds with the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode.
- Please refer to number 11, earbuds reset operation. After resetting successfully, they will enter Bluetooth pairing mode.
Button Functionality
Play/ pause the music : Double-tap
Answer/End a call : Double-tap
Next track: Triple-tap
Reject the incoming call (incoming call status ):
Press and hold the touch button for 2s
Activate voice assistant:
Press and hold the touch button for 2s and you hear the prompt tone, and then
release it
Earbuds Indicator Light Display
Touch Button: white light is on when touched.
Bluetooth Pairing: red light flashes slowly.
Successful Connection : indicator light is off.
Low Battery : red light quickly flashes twice every 20s.
Charging Case Indicator Display
• Open the upper cover of the charging case or short press the charging case
button to display the battery power for 10 seconds.
• Indicator light displays when the earbuds are in the charging mode.
The left-most and right-most indicator lights of the charging case will show
the charging status of the left and right earbuds respectively. During the
charging process, the indicator lights will always be on. When fully charged,
they will be off.
Charging Guidelines
• Charging of the earbuds: Put earbuds into the charging case. Then close the
cover and charging will begin. Charging time of earbuds: about 90 minutes
• Charging of the charging case: Insert one end of the USB cable into
a power supply that supports 5V output, and the other end into the charging
port of the charging case. The indicator lights will flash while it is
charging, and the 4 indicator lights will always be on when it is fully
charged.
Charging time of the charging case: about 210 minutes
How to Reset the Earbuds
Place the left and right earbuds back into the charging case. With the cover
open, press and hold the charging case button until the 4 indicator lights of
the charging case flash four times at the same time, indicating that the
earbuds are successfully reset.
Note : If there is a Bluetooth device connected to the ear buds after
resetting, the pairing will need to be deleted for successful re-pairing.
The Left & Right Earbuds Pairing Guidelines
First, disconnect the earbuds from the Bluetooth device. Put the left and
right earbuds into the charging case, then take them out. Double-tap the touch
button and the red light will flash slowly. Then long-press the touch button
until the red light flashes quickly. After a few seconds, the red light on the
left earbud will flash slowly, and the red light on the right earbud will be
off, indicating that the left and right earbuds are success fully paired and
connected.
Note: When the left and right earbuds lose connection.
FCC Statement
Changes or modifications not expressly approved by the party respon sible for
compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interfer once in a
residential installation. This equipment generates uses and can radiate radio
frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communication.
However, there is no guarantee that interference won’t occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be deter mined by turning the equipment off
and on. Users are encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit that is different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interfer
ence that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>