tzumi Fusion Clean User Manual

June 6, 2024
Tzumi

Tzumi Fusion Clean User Manual

Tzumi Fusion Clean

Tzumi Fusion Clean Picture 1

A Cool, Cordless Clean

Congratulations on the purchase of your new Fusion Clean-the vacuum without limitations.

With no cord, a rechargeable battery, and a dustbin that’s quick and easy to clean, the Fusion Clean is all you need for any cleaning job. Able to seamlessly switch from a traditional vacuum to handheld vacuum in seconds, the Fusion Clean allows for ultimate convenience and cleaning power.

Get ready for Floor Wheel Drive!

What’s in the Box

Your new Fusion Clean is easy and quick to assemble.

Let’s start with all the parts you will be taking out of the box:

What's in the Box

Get Familiar with Your Fusion Clean

Get Familiar with Your Fusion Clean

Setup

  1. Insert the battery to the back of the vacuum unit
  2. Attach the extension tube to the vacuum unit.
  3. Fix your desired attachment to the other end of the extension tube.
    • Attachments can also be directly connected to the main vacuum unit.
Using the Vacuum
  1. There are four different attachment tools, each with their own unique function.
  2. Floor Roller Brush
  3. Mini Power Brush
  4. Extension Wand with Brush Head
  5. Dusting Brush
  6. Use the trigger on the vacuum unit to turn it ON. Press once for low power, twice for high power, and three times to turn the vacuum OFF.
  7. Let’s go floor wheeling! (start cleaning)
Charging the Vacuum
  1. You should fully charge the battery before the first use, which takes about 4-5 hours. The indicator light will flash while charging and will change to solid green when fully charged.
  2. Insert the adapter into the vacuum and then plug it into the nearest wall outlet. The indicator light should then flash once.
Cleaning the Vacuum

Note: Please be sure the vacuum is powered OFF before cleaning.

Dustbin

  1. Press the release button on the dustbin to open the dust collector and empty.
    • You can use the other release buttons on the vacuum to remove the dustbin completely for an easier clean.

HEPA Filter

  1. Remove the vacuum unit from the dustbin.
  2. Unscrew the top of the dustbin to reveal the HEPA filter.
  3. Wash the HEPA filter under running water and let air dry.
    • If you plan on replacing the HEPA filter, throw the old one out and insert a new one instead.
  4. Make sure the HEPA filter is completely dry before re-inserting.

Attachments

  1. The roller brush can sometimes become jammed, in which case it will need to be cleaned to maintain maximum effectiveness. To do so, carefully remove anything that has become entangled in the bristles of the brush.
  2. The floor roller brush and mini power brush can be disassembled for extensive cleaning.
    • Floor brush: Move the slider button on the bottom of the brush to the unlock position. Remove the bristles from the brush and clean.
    • Carpet brush: Use your finger or a coin to turn the dial on the side of the brush to the unlock position. Remove the bristles from the brush and clean.
  3. The wheel axles on the roller brush can also become jammed and will need to be cleaned from time to time.
Installing Wall Mount
  1. Choose a location to install your wall mount (it is best to choose a location near a wall outlet).
  2. Make sure the wall mount is straightly positioned in your desired location.
  3. Use a drill or screwdriver (not included) to drill the anchor and screws into the wall, making sure it is secure.
  4. Hook the vacuum onto the mount.

Warnings

  • Always make sure the vacuum is OFF when charging.
  • The charging adapter may become warm when in use (this is normal).
  • Do not vacuum ashes, burning items, hot items, foam, etc.
  • Do not attempt to take apart.
  • Stop use if battery is swollen or leaking.
  • Not intended for use by children.
  • Ensure nothing is blocking the airflow.
Specifications

Specifications

IonVac Fusion Clean Item No. 8201. Distributed by tzumi inc. NY, NY, 10016.
Copyright 2021 tzumi. All Rights Reserved. Made In China.
All pictures shown are for illustration purpose only.
Actual product may vary due to product enhancement.

If you have any questions or need support setting up or using your Fusion Clean, email us atsupport@tzumi.com or call 1-855 -GO-TZUMI

For more details on the ionVac family of products or to check out more brilliant innovations visit:www.tzumi.com.

TZUMI Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals