BORMANN BVC3310 Square Rechargeable Stick Tornado Vacuum Cleaner Instruction Manual

BORMANN BVC3310 Square Rechargeable Stick Tornado Vacuum Cleaner

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes. To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Safety instructions

Please read all safety instructions below and follow all general safety measures before use, any incompliant operation may cause damage of the product. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Recycling:
This marking indicates that this product should not be disposed of with other household, wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled, waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your, used device, please use the return and collection systems or contact the retailer where the product was, purchased. They can take this product for environmentally safe recycling.

• Do not use the appliance to pick up the high-temperature goods, (matches, cigarette ends, hot ashes or any hot) micro dust, (lime, cement, bits of wood, land plaster,ashes, carbon dust) large sharp stuff,( broken glass, nails, pins) dangerous goods,( disincrustant, Solvents) chemical substances, (acidoid, detergent) flammable liquid,(gasoline, alcohol).

• Please keep the air outlet of appliance away from hair, loose clothing, fingers or other parts. Do not use suction tube, tube extension handle or another tool point at the eyes, ears or put in the mouth.

• If large pieces of paper, paper balls, plastic sheets or sharp objects are found, and anything that is thicker than a straw, please remove them in advance in case the suction tube is blocked to affect the use of the product.

• When using if the electric leakage or high temperature of motor and abnormal sound are found, for instance, high temperature of body part, abnormal sound and smell, weak suction etc, please stop using at once.

• Please check the dust cup regularly, if the dust cup is full, please clean it in time, keep the air outlet unblocked to avoid loss of suction power, motor heating that may lead to the reduction of vacuum cleaner service life.

• Please check the aluminum alloy tube unblocked regularly, if there is a blockage, please clean it up in time to avoid the reduction of suction and affect the performance of the appliance.

• When cleaning the appliance, do not use lubricants, cleaners, polishes to clean any part, please call our customer service department for help when the appliance breaks down, do not repair by yourself.
  The plug must be removed from the socket outlet before cleaning or maintaining the appliance. The appliance is only to be used with the power supply unit provided with the appliance.

  • The battery must be removed from the appliance before it is scrapped;
  • The appliance must be disconnected from the supply mains when removing the battery;
  • The battery is to be disposed of safely.

Take out the battery pack by holding the vacuum cleaner handle with the right hand, pressing the battery pack release button with the left hand, and pulling out the battery pack with the notice not sent by the fingers.

Technical Data

Description of main parts

1. Battery set
2. Digital screen
3. Handle
4. Fix for on/off switch
5. On/off switch
6. Release for dust-cup
7. Dust-cup
8. Release for metal tube
9. Metal tube
10. Release for floor brush
11. Release for brush roller
12. Motorized floor brush
13. Long crevice
14. Furniture nozzle
15. Dusting brush
16. Stand for charging and accessory holder
17. Mini motorized brush

• The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
• Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
• To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Operating instructions

Charging methods of the machine

• Note: Be sure to turn off the vacuum cleaner before charging it!
• The display will automatically recognize when the machine is charging!
• After fully charged, the machine will automatically stop charging to protect the battery, so the charger can be connected to the power for a long time without damaging the battery.
• As shown in Figure A, the machine can be directly connected to the power adapter and can be charged directly.
• As shown in Figure B, the battery can be removed and charged directly.
• As shown in Figure C, it can be charged on the wall mount, and the shrapnel of the machine and the charging pin can be fully charged once connected.

Vacuum floor operation

1. Step on the floor brush and pull down the vacuum cleaner to start cleaning work.
2. Turn on the switch and press the upper button to fix the switch if necessary.

Cleaning and maintenance

Cleaning the dust-cup
Please stop working before cleaning. Push the release button, then fall off the dust vacuum cleaner can only be used after the dust cup is closed .

Cleaning the filter system

1. Please stop working at first before cleaning.
2. Scrubbing with water or neutral detergent,the cleaning cloth must be wrung before scrubbing. Do not penetrate the water into the interior of the vacuum cleaner electrical component.
3. After cleaning, take care not to place the cleaner in the sun or in a damp place.
4. Pull the release ring and remove the dust cup. Contra-rotate,get out the filters, then cleaning.

Important! Filter element and screen can not be washed by washing machine, can not be blown by hair dryer.

Attention!
Do not use the brush while washing the filter element, scrub to avoid damage to filter element. Filter element should be washed after washing. Make sure it is dry before loading it into the vacuum cleaner.

Removing the floor brush:

1. Please make sure the power switch is turned off
2. According to the manual of taking down the brush
3. Get out the transparent cover of the brush from brush top, then get out the roller to clean

Cleaning the neck of the floor brush:

1. Push down neck to a straight position.
2. Clean dirt inside the neck regularly to make sure a stable suction power.

Reattaching the floor brush:

Attention!
The roller brush is installed into the floor brush, and the installation must be accurate, otherwise, the roller brush cannot move on.

Troubleshooting

Treatment of common problems:

Attention! If you find that the vacuum cleaner is not working properly, turn off the power of the vacuum cleaner before performing the inspection.

Trouble phenomenon| Cause| Treatment method
The product does not work| Battery No power Battery aging Motor abnormal| Charging the battery

Buy one new battery and replace it Return the product to the retailer or after sales for repair

A vacuum cleaner cannot suck or has low suction power| Filter blocked

Dust cup with full dust

Dust cup is not installed correctly Roller brush

blocked

Filter used too long

| Wash the filter, can be cleaned with detergent and a toothbrush. Dry before use,to prevent breeding bacteria.

Clean the dust cup.

Install the dust cup correctly. Clean the roller brush.

Buy new filter and replace every six months.

The Roller brush stopped working during vacuuming| Roller brush blocked| Clean the roller brush
The battery cannot be charged| Poor contact of the shrapnel on the charging base| Do not bump or move the charging stand before

the charging indicator is keeping light.

Toggle shrapnel by hand

The charging indicator does not light up| The circuit inside the charging, base is damaged Charging dock power is not plugged into the socket| Return the product to the retailer or after sales

for repair

Check the adaptor power cord if plugged into the

socket

Odour from the air outlet of the vacuum cleaner| Filter is not cleaned| Wash the filter. Dry before use,to prevent breeding bacteria
The vacuum cleaner has a plastic smell| New product| The plastic smell will fade after a while use

Environmental protection first

1. Before discarding the machine, make sure it is not reusable.
2. This machine has a variety of recyclable parts, please send it to a waste recycling center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>