Connects2 CAM-26 IR revers Camera with 1099 HD CCD Sensor User Manual
- June 6, 2024
- Connects2
Table of Contents
Connects2 Vision CAM-26 IR Rearview Camera User Manual
PRODUCT FEATURES
Image Sensor: 7080
TV Lines: 480
Lumen: 0.1 Lux
Horizontal Angle: 170 Degrees
Vertical Angle: 120 Degrees
TV System: NTSC
Video Output: 1.0V p-p 75ohm
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 114mA @ 13.8V
Waterproof Rating: IP68
Operating Temperature: -20 Degrees C to +70 Degrees C
Parking Lines: Yes
Image: Mirror
Infra-Red LED’s: Yes
DISCLAIMER
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for
installation.
Please ensure you use the correct tools to avoid damage to the vehicle or
product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter
any technical issues. With this in mind, when contacting Connects2, try to
provide as much Information as possible. This will speed up the process and
help us to help you.
Please use our dedicated online technical support centre:
support.connects2.com
CONTENTS
- Camera with 40cm cable to Female DC connector and RCA Female connector
- 1m DC power cable with Male DC connector
- 6m Male to Male RCA extension cable
- 21mm hole saw
- Instructions
INSTALLATION
- Connect the Black wire to a suitable ground and the Red wire to a switched +12V supply.
- If the camera is to be used in the rear of the vehicle, the Red wire should be connected to the reversing light circuit or an interface which provides a reverse signal.
- Select a suitable location for the camera and ensure that the area is free from all cables, fuel & oil. Whenever possible, avoid locations that are subject to road dirt & water spray.
- Aim to mount the camera preferably 45-60cm from the ground and cut a suitable hole using the cutting tool provided.
- Using the supplied video cable, connect the camera to the display screen and ensure that the image is displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips…
www.youtube.com/connects2
Documents / Resources
|
Connects2 CAM-26 IR revers Camera with 1099 HD CCD
Sensor
[pdf] User Manual
CAM-26, IR revers Camera with 1099 HD CCD Sensor
---|---