VIVO DESK-V000VS Height Adjustable 32 Inch Stand Up Desk Converter Instruction Manual
- June 6, 2024
- Vivo
Table of Contents
Black 32″ Desk Riser
Instruction Manual
SKU: DESK-V000VS
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v000vs
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
|
www.vivo-us.com
Chat live with an agent!
|
---|---|---
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and does not
exceed weight capacity.
We cannot be liable for damage or injury caused by an improper mounting,
incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
WARNING| 
---|---
PINCH POINTS DO NOT
place hands on or near support bars. Moving parts can crush and cut. Pinch
points are created during lifting and lowering the work surface. Failure to
follow these instructions may result in serious personal injury.
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Carefully remove the desktop ( A ) from the packaging.
STEP 2
Flip the desktop ( A ) upside down, then attach the extended feet (B )
to the frame using M5x10mm screws ( C ).
STEP 3
Press the handle on the side and lift the desktop ( A ).
STEP 4
Mount brackets (D) to keyboard tray (G) using M5x10mm screws
(C).
STEP 5
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to
secure.
STEP 6
Place monitor, laptop, and other items on the desk surface.
STEP 7
Attach cable clip (E) to the desk to manage keyboard and mouse
cables.
STEP 8
Manage cables using zip ties (F).
STEP 9
If locks are not releasing properly to change desk height, adjust the position
of the black tube containing the steel release cable. Turn the nuts at the end
of the tube just behind the handle as shown, moving the tube away from the
handle until the cable once again has proper tension, then tighten the
nuts.
CAUTION!
|
---|---
Keep monitor and laptop base fully on the desktop.| Follow the cable routing
instructions to avoid the potential to pinch cables.
| 
Leave enough slack in the cable to allow for a full range of vertical motion
(15″ / 38 cm).| Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
---|---
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): <
15 M
309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- DESK-V000VS 32” Desk Converter – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>