SDC 492 Pull Station Emergency Door Release Pull Station with Siren Instruction Manual
- June 6, 2024
- SDC
Table of Contents
SDC 492 Pull Station Emergency Door Release Pull Station with Siren
Instruction Manual
INSTALLERS NOTE
The station is supplied with the glass rod removed. It is recommended that the station be activated and tested prior to installation of the glass rod.
Glass Rod and Hardware are shipped in the station box.
REPLACEMENT OF GLASS ROD
Use an allen wrench to open front cover of station. Carefully remove the glass debris from broken rod, then reset T-Handle to the normal position.
To replace Glass Rod, insert one end of rod under Spring Tab. Then, with one finger lift other end of Spring Tab allowing Glass Rod to slip into place.
TO CLOSE STATION
Simply push station closed.
OPTIONAL
Back box model #492-BB available for surface mount.
Replacement Glass Rod #492-GL4
NOTE:
Switches shown with the T-handle in the nonactivated (up) position.
ELECTRICAL SPECIFICATIONS
Switch Contacts: DRY (2) SPDT 10A@125vac
Buzzer: 12/24vdc @ 10/20ma
Any suggestions or comments to this instruction or product are welcome. Please contact us through our website or email engineer@sdcsecurity.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>