SDC EA100 Exit Annunciator Installation Guide
- June 6, 2024
- SDC
Table of Contents
INSTALLATION INSTRUCTIONS
EA100
EXIT ANNUNCIATOR
The SDC Exit Annunciator is a highly visible multicolor signal device that interfaces with Delayed Egress or standard EMLocks plus many other manufactures electromagnetic locks. It can also be wall,ceiling or frame- mounted. The EA100 may also be connected to other devices to serve as an external visual indicator.
Features:
- Easy to install
- Suitable for retrofit or new construction
- Multi-color LED technology
- Externally selectable color modes of RED, Green, Blue, White, Yellow, and Purple.
- Externally selectable Solid or Flashing modes.
Specifications:
Dimensions: 8-3/4” X 1-1/2” X 3/4”
Electrical: 12/24VDC @ 80/100mA Max.
Power Long life LED output:3 Primary colors, Red,
Blue, Green (solid or chasing)
Operation:
Applying 12vdc or 24vdc power and activating a control wire will turn on the associated primary color (Red, Green, Blue). Activating two colors at the same time will produce secondary colors (Violet, Yellow, Blue/ Green) . Activating all three colors will produce White. Activating the Chase wire will cause the color(s) that are selected to flash.
APPLICATIONS
Use double-sided tape or screws to mount brackets in your selected location or
on a magnetic lock. Snap EA100 circuit board onto mounting bracket. Connect
wiring then install lens cover and EA100 Cover.
Typical Delayed Egress Applications
EA100 Operation
Green – The door is locked and secure.
Amber – The unit is in an alarming countdown cycle.
Red – The unit is in alarm and the door is unlocked. 
- Note:
Both the Orange and White wire can be wired to the same connection for enhanced visibility.
P:\INST INSTRUCTIONS\CONTROLS ANNUNCIATORS\INST-EA100
SECURITY DOOR CONTROLS WWW.SDCSECURITY.COM [t] 800.413.8783 805.494.0622 E-mail: service@sdcsecurity.com 801 Avenida Acaso, Camarillo, CA 93012 PO Box 3670, Camarillo, CA 93011
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>