OVE 15WTU-DELL36-BLK Della Arch Walk In Panel 36 Instruction Manual

OVE 15WTU-DELL36-BLK Della Arch Walk In Panel 36

SHOWER DIMENSIONS

| Measurements
---|---
A| Shower height
B| Shower width
C| Shower depth
D| Fixed panel width

Measures : inch [millimeter]

INSTALLATION STRUCTURE OVERVIEW

1. Before you start the installation of your product consult the illustration 1 below showing a side-view of the completed installation.
   NOTE : Customer must follow and comply with the local and national building and plumbing codes. All illustrations in this manual are for reference only and do not take precedent on any code or regulation. This product should be installed by a professional.
   

FAQ

• Q : What thickness of cement must I apply?
• A : Between 25 mm and 38 mm (1 in and 1.5 in).
• Q : Is the base installed on the studs or on the drywall?
• A : On the studs.

PACKAGE CONTENT

PART LIST

Matt Black: 99SRU-6W44195L-WM
C| Vertical seal strip Bande| 2| Transparent: 99SRU-651N33Y0-WM
Matt Black: 99SRU-RAZN5R56-WM
D| Bottom seal strip Bande| 1| Transparent: 99SRU-P89XM790-WM
Matt Black: 99SRU-SWQVO3MI-WM
E| Frame track (top)| 1| Satin Nickel: 99STR-O8WCGNZ1-WM
Matt Black: 99STR-82R2P58Z-WM
Brushed Gold: 99STR-487I5XDF-WM
F| Frame track (bottom)| 1| Satin Nickel: 99STR-88S2FC0N-WM
Matt Black: 99STR-HUEW14BB-WM
Brushed Gold: 99STR-0B5T071V-WM
***| Complete hardware kit| 1| Satin Nickel: 99SHW-IFC89QX3-WM
Matt Black: 99SHW-GQ25TKJB-WM
Brushed Gold: 99SHW-78JA4Q9U-WM

SUPPLIED HARDWARE LIST

• Wall Anchor ø8x30mm 4+1

• Screw ST5x30mm 4+1

• Screw ST4x20mm 2+1

TOOLS REQUIRED (not supplied)

• Pencil

• Screwdriver
  

• Drill and drill bits ø1/8” (3mm) & ø5/16” (8mm)

• Safety glasses

• Measuring Tape
  

• Level
  

• Silicone
  

• Rubber mallet
  

SAFETY INFORMATION

CAUTION

Please carefully read the following important safety information before handling or installing this shower. There is a risk of serious injury while handling this product. To minimize these risks, please note:

• Always wear safety glasses and gloves while handling.
• Always read and follow all the steps in the installation instructions.
• Inspect all contents and glass for damage before installation.
• Extreme caution should be taken while handling the glass during installation as the tempered glass may shatter if in contact with a hard surface.
• Handle the tempered glass with caution! Improperly handling the glass can cause it to break suddenly in small pieces (never in pointed fragments).
• Always take all precautions not to touch the tempered glass with any tools during the installation, or after installed.
• Do not cut or modify the tempered glass as it will shatter if cut.
• Carefully remove product from packaging and keep packaging until installation is complete.
• Inspect all parts for damage; if there is damage to the unit prior to installation, please contact customer service at the number provided in this guide.
• Install the shower on a floor that is level and able to accommodate the weight of the unit and an occupant.
• Consult local building codes and compliance standards prior to installation and ensure conformity.
• After installation, and from time to time, check the glass for fit and finish to ensure that nothing has come loose since installation.
• Keep this installation manual for future reference.

SAFETY NOTICE

NOTICE

Any modification or alteration from what is specified in this instruction manual will void any and all warranty on this product.
The distributor is not responsible for any damage to the unit or personal property caused by improper installation. If you disregard instructional warnings, you will void your warranty and possibly deal with water damage.
Consult the distributor’s website for any additional information or question on this product’s installation.

PREPARATION

You will need at least two people to install this unit properly.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

FRAME INSTALLATION

1. Position the frame track (E) as illustrated. Level the track (E) and mark the track holes positions.

2. Remove the track and drill pilot holes in the marked locations with a ø5/16” (8mm) drill bit.

3. If there are no studs located behind the frame track (E), then insert the wall anchors (AA) using a rubber mallet until the wall anchors are flush with the wall.
   WARNING : If a composite shower wall is installed, then the screws must be installed on studs, do not use wall anchors.

4. Replace and secure the track (E) with screws (BB). Do not overtighten.
   
   

Position the frame track (F) as illustrated. Mark the track holes positions.
Remove the track and drill pilot holes in the marked locations with a ø1/8” (3mm) drill bit.
Replace and secure the track (F) with screws (CC). Do not overtighten.

SEAL STRIPS INSTALLATION

3.1-3.3. Install the vertical seal strips (C) and top seal strip (B) onto the fixed panel (A).
3.4. Install the bottom seal strip (D) onto the fixed panel (A), cut the surplus at bottom of the vertical seal strips (C) for the bottom seal strip (D).

4.1. Firmly insert the fixed panel (A) into the frame tracks (E & F).
4.2-4.4. Insert the frame track (E) into the fixed panel (A) using a rubber mallet

SEALING

Apply a clear silicone water sealant around the outside perimeter of any fixed shower components. Allow 24 hours for silicone to dry. Improper application of silicone sealant may cause your shower to leak.

MAINTENANCE AND CARE

For the daily maintenance, use a wet cloth and a soft liquid cleaner.
Never use abrasive cleaners containing some acetone, chlorine or strong bleach, scrapers, metallic brushes, nor other objects or the products which can graze or tarnish surfaces.
Use a ratchet to strongly tighten any bolts used to support the fixed glass panels or doors panel (support bolts can withstand up to 250 lbf*in of torque).
Check these bolts every 4 months and re-tighten them if necessary.

Questions, problems, need help?
Call our customer service department at
1-866-839-2888, 8 a.m. – 5 p.m., EST, Monday – Friday

LIMITED Product Warranty

The DISTRIBUTOR is a distributor of the following Products:

• Shower Doors (warranty period 5 years).
• Acrylic Surfaces (warranty period 5 years against blistering, cracking or chipping in the acrylic surface).
• Acrylic Shell Structure (warranty period 5 years against loss of water through fiberglass laminate of the acrylic body).
• Shower Hardware (handles, hinges, rubber support clips, metal support bars and wall tracks) (warranty period 1 year against defects in materials or workmanship).

Limited Warranty: The DISTRIBUTOR warrants to the original retail purchaser that within a reasonable time after notification from purchaser, The DISTRIBUTOR will repair or replace the Product, or any part or component of the covered Product, distributed by The DISTRIBUTOR which is proven to the satisfaction of The DISTRIBUTOR to be defective in workmanship or materials, and which has failed during normal use and within the warranty period. This Limited Warranty does not apply to Products that have been damaged, or which fail, as a result of causes other than manufacturing defects (such as but not limited to improper installation; lack of or improper care or maintenance; exposure to elements including corrosive products, environments or water; alteration; abuse or misuse). This warranty does not cover damage to finishes. The warranty commences on the first date a Product is purchased by the customer. This warranty applies exclusively to products purchased and used in non-commercial applications.
Warranty Claim Procedure: To make a claim please call The DISTRIBUTOR’s helpline to trouble-shoot the issue and start the claim process. Products may be inspected or evaluated by The DISTRIBUTOR and any Product or component found to meet the above warranty criteria will be repaired or replaced at The DISTRIBUTOR’s option. Replacement or repaired parts will be shipped at no cost to customer via ground freight only.
Any expedited methods of shipments are customer’s expense.
DISCLAIMER AND EXCLUSION OF WARRANTIES : This warranty is meant to be a complete and exclusive statement of the terms of all limited warranties offered by The DISTRIBUTOR.
To the fullest extent permitted by law, other than the express warranty set forth in this instrument there are NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE EXTENDED BY The DISTRIBUTOR.
This warranty gives you specific legal rights. You may also have rights, which may vary under applicable state, provinces, or national legislation, which cannot be disclaimed or modified by the above Disclaimer. Except as permitted, the Disclaimer is not intended to waive, modify, release or limit the applicability of preemptive state, province, or national legislation inconsistent with the terms of this Limited Warranty and Disclaimer. However, to the extent permitted by law, no implied warranties of merchantability or fitness are intended or extended hereunder. Notwithstanding the Disclaimer if any implied warranty is imposed by operation of law, to the extent permitted, the duration of such implied warranties is limited to the shorter of the term of the express warranty or the applicable statute of limitations.
The Products listed above are intended to be installed and used for personal, consumer residential use. Use of Products for any other purpose such as commercial purposes voids this warranty. The Limited Warranty is applicable only to the Products listed herein, and no warranty is extended to products not distributed by The DISTRIBUTOR. The warranty is applicable only to the first retail purchaser.
Transferability: This warranty is not transferable.
LIMITATION AND EXCLUSION OF REMEDIES AND DAMAGES: The DISTRIBUTOR’s sole responsibility under this Limited Warranty shall be to repair or replace, at its option, any defective Product or component. Purchaser agrees that this is the sole and exclusive remedy under this Limited Warranty. The DISTRIBUTOR will not be responsible for any incidental, consequential, special or indirect damages, including loss of use as a result of any manufacturing defect in a Product. The DISTRIBUTOR will not be responsible for labor, or any other fees associated with removal or installation of warranted parts. Some states, provinces, or national legislation do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
Product modification: The DISTRIBUTOR reserves the right to change, modify or improve the Products without obligation to incorporate such changes in Products previously sold or installed.
Authority and Modification: The retail seller is not the agent of The DISTRIBUTOR and is not authorized to vary or modify the terms of the Limited Warranty. In addition, the retail seller cannot bind The DISTRIBUTOR or make any representations or promises about the Product that are binding on The DISTRIBUTOR.

Customer Support

www.ovedecors.com | [email protected]

References

• Home | Decor , Fixtures & Lighting | OVE Decors

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>