SEGWAY K014P1136-A0 S-Plus Smart Self-Balancing Electric Transporter Intelligent Following Robot Instruction Manual
- June 6, 2024
- Segway
Table of Contents
ES1L/ES1LD
Ninebot KickScooter
Product Manual
The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com to download the latest user materials.
Diagram
Dashboard & Power button
Speedometer: Indicates the current speed. Also displays error codes when
faults are detected.
Battery level: Indicates the remaining battery level with 5 bars. Each
bar equates to approximately 20% power level.
Riding mode:
—Red “S” icon: Sport mode (maximum power).
—White “S” icon: Standard mode (moderate power).
—No “S” icon: Speed limit mode (minimum power).
Power button: Short press to power on. Long press to power off. When
powered on, press to turn on/off the headlight; Press to turn on/off the rear
light. Double-press to change mode.
Error display: The lit wrench icon indicates the scooter error.
Specifications
| item| Parameter
---|---|---
Product| Name| Ninebot KickScooter
Model| ES1L ES1LD
Length x Width x Height| Approx. 40.2 x 16.3 x 44.5 in (102 x 41.3 x 113 cm)
Folded: Length x Width x Height| Approx. 44.5 x 16.3 x 12.6 in (113 x 41.3 x
32 cm)
Net Weight| Approx. 24.9 lbs (11.3 kg)
Rider| Payload| 55-220 lbs (25-100 kg)
Recommended Age| 14+ years
Required Height| 3’11”-6’6″(120-200 cm)
Machine| Max. Speed| Approx.12.4 mph (20 km/h)
Typical Range III| Approx.12.4 miles (20 km)
Max. Slope| Approx. 7°
Traversable Terrain| Asphalt/flat pavement: obstacles < OA in (1 cm): gaps
<1.2 in (3 cm)
Operating Temperature| 14-104°F (-10-40°C)
Storage Temperature| 14-122°F (-10-50°C)
IP Rating| IPX4
Duration of Charging| Approx. 6 h Approx. 3.5 h
Battery| Nominal Voltage| 36 V
Max. Charging Voltage| 42 V
Charging Temperature| 32-104°F (0-40°C)
Nominal Energy| 184 Wh
Nominal Capacity| 5100 mAh
Battery Management System| ever-heating. short °mud. over-current. over-
discharge and over-charge protectoca
Motor| Nominal Power| 0.25 kW. 250W
Charger| Output Power| 0.042 kW. 42 W 10.071 kW. 71W
Input Voltage| 100-240 V∼
Output Voltage| 42 V
Output Current| 1 A 1.7 A
Features| Shock Absorber| Front
Riding Modes| Speed limit mode. Standard mode and Sport mode
Tire| Tires| Hollow tires. Material: NR + SBR + SILICA. Size: 8 * 2.0. Without
nozzle
[1] Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25℃), 60% of max. speed on average on pavement* Some of the factors that affect range include: speed, number of starts and stops, ambient temperature, etc.
Certifications
This product is certified to ANSI/CAN/UL-2272 by CSA.
The battery complies with UN/DOT 38.3.
For model: ES1L
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-3 (B)/NMB-3(B)
For Model: ES1LD
European Union Compliance Statement
Important WEEE information
WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycling responsibly promotes the sustainable reuse of materials resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Battery recycling information for the European Union
Batteries or packaging for batteries is labeled in accordance with European
Directive 2006/66/EC and amendment 2013/56/EU concerning batteries and
accumulators and waste batteries and accumulators. The Directive determines
the framework for the return and recycling of used batteries and accumulators
as applicable throughout the European Union. This label is applied to various
batteries to indicate that the battery is not to be thrown away, but rather
reclaimed upon the end of life per this Directive.
In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU,
batteries and accumulators are labeled to indicate that they are to be
collected separately and recycled at end of life. The label on the battery may
also include a chemical symbol for the metal concerned in the battery (Pb for
lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators
must not dispose of batteries and accumulators as unsorted municipal waste,
but use the collection framework available to customers for the return,
recycling, and treatment of batteries and accumulators. Customer participation
is important to minimize any potential effects of batteries and accumulators on
the environment and human health due to the potential presence of hazardous
substances. Before placing electrical and electronic equipment (EEE) in the
waste collection stream or in waste collection facilities, the end-user of
equipment containing batteries and/or accumulators must remove those batteries
and accumulators for
separate collection.
Restriction of Hazardous Substances (RoHS) Directive
This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables,
cords, and so on) meets the requirements of Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment (“RoHS recast” or “RoHS 2”).
Electromagnetic Compatibility Directive & Machinery Directive
Segway Europe B.V.
EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC Amsterdam,
The Netherlands. Hereby, [Ninebot (Changzhou) Tech Co., Ltd,] declares that
the equipment type [ES1LD] is in compliance with the essential requirements
and other relevant provisions of Directives 2014/30/EU & 2006/42/EC.
www.segway.com
K014P1136-A0