SAVANT PAV-SMS2001-10 IP Audio Music Server User Guide
- October 27, 2023
- SAVANT
Table of Contents
SAVANT PAV-SMS2001-10 IP Audio Music Server
Box Contents
- IP Audio Music Server (PAV-SMS2001-10)
- Installation Kit (075-0208-xx)
- 5V DC 3A Power Supply (025-0223-xx)
- Product Regulatory Statement (009-1950-xx)
Specifications
Additional Information
The Spotify Software is subject to third-party licenses found here:
https://www.spotify.com/connect/third-party-licenses.
Refer to the following documents located on the Savant Customer Community for
additional information.
- Savant IP Audio Deployment Guide (009-1571-xx)
- Savant Device Networking Guidelines
- Savant IP Audio AVB Network Design Reference Guide
Front Panel
Network Configuration
To ensure that the IP Address will not change due to a power outage, a static
IP Address or DHCP reservation should be configured. Savant recommends using
DHCP reservations within the router. By using this method, static IP Addresses
for all devices can be managed from a single UI, avoiding the need to access
devices individually.
NOTE: Setting DHCP reservation varies from router to router. Refer to the
documentation for the router to configure the DHCP reservation. Refer to the
Savant Device Networking Guidelines on the Savant Customer Community.
Network Requirements
The PAV-SMS2001 requires an Audio Video Bridging (AVB) network for systems with more than one Savant IP Audio Device. Connect all Savant devices to the same local area network (LAN) or subnet as the host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the Savant devices as this may interfere with performance.
Rear Panel
Installation
The PAV-SMS2001 should be installed on a solid, flat, level surface. The device will fit on a 1U rack shelf. The location should be dry, well- ventilated, and out of direct sunlight.
Rack
The optional RMB-PAVAM2F-xx or RMB-PAVAM2-xx allows two devices to be mounted side by side. This rack is compatible with all standard 19-inch National Electrical Manufacturers Association (NEMA) rack mounts. The instructions below show the RMB-PAVAM2F-xx, both brackets install the same way they just face different directions.
- Align the bracket with the device’s mounting points.
- Attach using the screws provided with the bracket.
Expansion
Multiple Savant AVB devices can be connected in a single system providing a virtual audio switch that can be configured to suit almost any need. Refer to the Savant IP Audio Deployment Guide on the Savant Customer Community for more information on the maximum supported AVB devices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>