BORMANN BWS1600 Digital Scale Instruction Manual

BWS1600 Digital Scale
Instruction Manual BWS1600
WWW.BORMANNTOOLS.COM

Introduction

This product can be used for weighing applications like all normal weighing scales. The device features a fat measuring system, and it can calculate weight, and at the same time, plan moisture rate measure fat rate, muscle a bone mass and basic metabolism, etc. body composition.

Technical Data:

• Available Modes: body fat, water, muscle, bone, BMI, calorie, weight
• Max capacity:5kg-180kg/0.1kg
• Measure fat range:5-50%/0.1%
• Measure moisture range:10-85
• Memory data: 12 profiles high precision sensors, auto on/off
• Overload Indication: err
• Low Power Indication: lo
• Available Units: kg, lb, st
• Graduation: 100g/0.2lb
• Max. Capacity: 180kg,396lb
• Min capacity: 5kg
• Tempered safety glass platform: 2802805mm
• Display: Lcd or led
• Size of display:75*30mm
• Battery Type:2*AAA

Operating Instructions

Selecting Personal Parameters

1. Press SET Key to turn the device on (every time turn on the scale to set it). Select one of the flashing personal data results/ profiles (n=0-11), press the up arrow key or the down arrow key (to increase or decrease and choose the number which you want (the device can store up to 12 settings) then press SET to confirm. If there is no action within 3 seconds, the system will confirm automatically the current flashing number is the current user measurement data.
2. After storing the user profile, the gender selection symbol will start flashing. Press the up arrow key or the down arrow key to select your gender. Press SET to confirm, if there is no operation, it will turn off automatically within 20 seconds.
3. After storing the gender, the age symbol will start flashing. Press the up arrow key or the down arrow key to adjust the age value, and press SET. To confirm if there is no operation, it will turn off automatically within 20 seconds.
4. After storing your age, the height symbol will start flashing. Press the up arrow key or the down arrow key to adjust the height value, and press SET. To confirm if there is no operation, it will turn off automatically within 20 seconds.
5. After storing all the data, the device will display “0.0”, which indicates that you can proceed to the calculation of fat.

Measurements

A. Calculating weight

1. Under the turn-off, please move on to repose fully the scale, screen will show your weight, after 3 times, it will be locked.
2. If there is no operation,it will be turn off automatically within 10 seconds.

B. Measurement:
Body fat, water, muscle, bone, calorie, weight, BMI Please bare feet stand steadily on the scale, feet with two electrode contact, body don’t swing. The screen will show your weight value, stability weight data flashing three times then be locked, it will indicate fat, water, muscle, bone, calorie, and weight, each measurement value will be displayed for two seconds, alternating cycle three times after the automatic shut-down.

Usage Notes

1. Ensure that the scale is placed on a hard & level surface, otherwise, the result will be inaccurate if on the carpet or uneven ground.
2. Keep the scale surface dry to avoid accidents by slipping.
3. When weighing please take off the socks, shoes, and clothes, at a relatively fixed time before the meal.
4. In order to measure precision, not recommended to weigh 2 hours after getting up.
5. Please put the scale in a dry place to protect the internal electronic components.
6. Please use a micro cloth to clean the scale, not immersed it in water.
7. Please don’t remove the scale except replace the battery.
8. Please don’t use heavy percussion or falls from a height.
9. Please don’t persistently put heavy on the scale to avoid damage to the high-precision sensor.

• The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
• Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade, or industrial businesses or for equivalent purposes.
• To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

WWW.BORMANNTOOLS.COM
**** DISPOSE OF PACKAGING RESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>