psb SPEAKERS ALPHA BluOS Streaming Powered Speakers User Guide
- June 8, 2024
- psb SPEAKERS
Table of Contents
- psb SPEAKERS ALPHA BluOS Streaming Powered Speakers
- WHAT’S INCLUDE
- Speaker
- WIRED SET UP
- WIRELESS SETUP
- INTRODUCTION
- Complete Control
- Features & Details
- SPECIFICATIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Limited Warranty
- FCC STATEMENT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
psb SPEAKERS ALPHA BluOS Streaming Powered Speakers
WHAT’S INCLUDE
Speaker
Primary Speaker
Secondary Speaker
WIRED SET UP
- Connect
Watch for the LED of the primary speaker to flash blue/purple and the secondary speaker to turn.
WIRELESS SETUP
-
Connect
Watch for the LED of both speakers to turn green. -
DOWNLOAD THE BluOS app
-
Follow the instructions on the app
Finish setup
INTRODUCTION
A True All-in-One Audio System
The Alpha iQ sets a new benchmark for modern, tangle-free, audiophile-grade
listening. The two speakers have 180W of built-in amplification and a network
streamer based on the award-winning BluOS multi-room music platform. To set up
the Alpha iQ, plug the two speakers into power outlets, then connect them to
your home using the friendly BluOS Controller app, which gives you access to
all the music ever recorded and the ability to share music from the Alpha iQ
to as many as 63 other players on the home network. The left and right
speakers communicate via a wireless link that can cover most rooms in an
average-size home without delays or latency, so that music stays synched and
clear regardless of speaker placement.
Small but Mighty
Available in Satin White and Satin Black finishes, the Alpha iQ has a
sleek, modern design. Inside each enclosure is a 4” polypropylene mid-bass
driver with steel basket and rubber surround, and a 0.75” aluminum dome
tweeter with neodymium magnet and ferrofluid damping. Each woofer has its own
60W class-D amplifier, and each tweeter its own 30W class-D amp, for a total
system output of 180W. The Alpha iQ employs a DSP-based active crossover.
Thanks to their powerful amplifiers, tuned bass ports, and DSP-enabled low-
frequency extension, PSB’s Alpha iQ speakers can deliver bass output that
completely belies their diminutive size. The Alpha iQ’s audiophile-grade DAC
supports resolution to 24-bit/192kHz and has full MQA decoding and rendering
capability for high-res streaming from Tidal.
Unlimited Music
Through the BluOS Controller app, you can play music from more than 20
streaming services including several that offer lossless and high-resolution
audio, such as Amazon Music, Deezer, Idagio, Qobuz, and Tidal as well as
internet radio stations from around the world. Apple Airplay 2, Spotify
Connect and Tidal Connect are also supported. For listening options beyond
streaming, a built-in MM preamp, RCA phono jacks and ground terminal allows
you to connect a turntable. Other inputs include an HDMI eARC port for
connecting to anHDTV, an optical input for connecting a disc player or game
console, and a 3.5mm auxiliary input for connecting analog sources.
The Alpha iQ has Bluetooth connectivity, with support for the high-quality
aptX-HD codec, for wireless playback from smart devices. You can connect an
external drive loaded with music files to the Alpha iQ’s USB port and control
playback
Complete Control
Listeners can control every aspect of the Alpha iQ’s operationwith the BluOS Controller app, which is available for Android, iOS, macOS, and Windows. Touch controls on the top of the primary speaker also provide immediate access for changing volume, pausing and resuming playback. Like all BluOS-enabled components, the Alpha iQ can be integrated into popular smart home systems like Control4,
Crestron, ELAN, RTI, and URC. Voice control is possible using Amazon Alexa, Google Assistant, and Apple Siri (via AirPlay 2). IR learning is also available for listeners who use harmonized remotes that can operate multiple A/V components.
PSB’s Alpha iQ BluOS Powered Speakers make it easy to enjoy True to Nature sound from your favorite streaming services and legacy sources—without cable clutter. It’s beautiful sound made simple.
Features & Details
- 4” polypropylene mid-bass driver with steel basket and rubber surround
- 0.75” aluminum dome tweeter with neodymium magnet and ferrofluid cooling
- Fully active design, with DSP crossover and dedicated amplifiers for each driver: 60W for each woofer and 30W for each tweeter
- Tuned port and DSP-enabled bass extension for excellent LF performance
- Low-latency wireless connection between the primary and secondary speakers for tangle-free installation
- Ethernet, Wi-Fi, and Bluetooth connectivity
- Built-in network streamer based on the award-winning BluOS multi-room music platform
- Integrated support for more than 20 streaming services, including several that offer lossless and high-resolution audio
- Music can be played through as many as 63 additional BluOSenabled components
- Audiophile-grade DAC with maximum resolution of 24-bit/192kHz
- MQA decoding and rendering capability for high-res streaming from Tidal
- Apple AirPlay 2 support for streaming from iPhones, iPads, and Macs
- Spotify Connect and Tidal Connect
- MM phono, HDMI eARC, optical, and auxiliary inputs
- USB port for connecting an external drive containing music files
- Subwoofer output with DSP-enabled low-pass and high-pass filters
- Support for Control4, Crestron, ELAN, RTI, and URC home-control systems
- IR learning capability for operating the Alpha iQ with harmonized remote controls
- Support for Alexa, Google Assistant, and Apple Siri voice control
SPECIFICATIONS
- FREQUENCY RESPONSE
- On Axis @ 0° ± 3dB 64Hz-20kHz
- LF Cutoff – 10dB 35Hz
- AMPLIFIER POWER
- Amplifier Power (per speaker) Tweeter = 30 Watts, Woofer = 60 Watts
- ACOUSTIC DESIGN
- Tweeter (Nominal) 3/4” (19mm), Aluminum Dome with Ferrofluid, Neodymium Magnet
- Woofer (Nominal) 4” (100mm) Cone, Rubber Surround, Steel Basket
- Design Type: Bass Reflex
- INPUTS
- Analog: 3.5mm, Phono MM
- Digital: BluOS, HDMI eARC, Optical
- Wireless: aptX™ HD Bluetooth (sink & source, 2-way)
- CONSTRUCTION
- Cabinet Sleeve: MDF
- Front Baffle: MDF on Aluminum
- Rear Baffle: Aluminum
- SIZE (W x H x D)
- Net Dimensions: 5 11/16” x 9 11/16” x 7 5/8”/ 145 x 246 x 192mm
- Net Weight: 7.36kg/ 16.2lbs pair
- Gross Weight: 8.27kg/ 18.2lbs pair
- Shipping Dimensions: 10 2/5” x 15 13/16” x 15 3/16”/ 268 x 402 x 385mm
- FINISH
- Available Finishes Painted; Matte Black, Matte White
IMPORTANT SAFETY INSTRUCTIONS
-
Read instructions-All the safety and operating instructions should be read
-
before the product is operated.
-
Retain instructions- The safety and operating instructions should be retained for future reference.
-
Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
-
Follow Instructions-All operating and use instructions should be followed.
-
Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
-
Attachments- Do not use attachments not recommended by the product manufacturer as they may cause hazards.
-
Water and Moisture- Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
-
Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
-
® Cart -A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
-
Ventilation – Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
-
Power Sources – This product should be operated only from the type of power source indicated on the marking label and connected to a MAINS socket outlet with a protective earthing connection. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
-
Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
-
Mains Plug – Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
-
Lightning- For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
-
Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
-
Overloading- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
-
Flame Sources – No naked flame sources, such as lighted candles, should be placed on the product.
-
Object and Liquid Entry- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
-
Headphones- Excessive sound pressure form earphones and headphones can cause hearing loss.
-
Damage Requiring Service- Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:- When the power-supply cord or plug is damaged.
- If liquid has been spilled, or objects have fallen into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
- If the product has been dropped or damaged in any way.
- When the product exhibits a distinct change in performance-this indicates a need for service.
-
Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
-
Battery Disposal – When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
-
Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
-
Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
Limited Warranty
PSB Speakers, a division of Lenbrook Industries Limited, warrants loudspeaker and subwoofer drivers for five (5) years; amplifiers, ,C…l. powered speakers and subwoofers for one (1) year; headphones for two (2) years; and other electronic devices for (1) year in the ~ USA and Canada. Warranty may vary in other countries so please contact your dealer or local distributor for service.
What is Covered and What is Not Covered?
Except as specified below, this warranty covers parts and labour to correct
all defects in materials and workmanship. The following are not covered by the
warranty:
- Damage, deterioration, malfunction or failure to meet performance specifications resulting from:
- a. Accident, acts of nature, misuse, abuse, neglect or unauthorized product modification.
- b. Improper installation, removal or maintenance, or failure to follow instructions supplied with the product.
- c. Repair or attempted repair by anyone not authorized by PSB Speakers to repair the product.
- d. Any shipment of the product (claims must be presented to the carrier).
- e. Any cause other than a product defect.
- Cleaning, initial set-up, inspections with no defects found, or charges incurred for installation, removal or reinstallations of the product.
- Any product on which the serial number has been defaced, modified, or removed.
- Accessories, including but not limited to, cables, adaptors, mounting hardware and brackets, and detachable cords.
- Any product used in any trade or business, or in an industrial or commercial application.
- Any product purchased outside the country of service, its possessions, or territories.
- Any problem other than a product defect.
- Any product not purchased from an authorized PSB Speakers Dealer.
What We Will Pay For
We will pay for all labour and material expenses for items covered by the
warranty. Payment of the shipping charges is discussed in the next section of
this warranty.
How You Can Get Service
- If your unit needs service, please take your unit with the original invoice or bill of sale to your PSB Speakers dealer. If you need assistance locating an authorized PSB dealer, please check our dealer locator at www. psbspeakers.com, or contact PSB Speakers.
- You must pay any shipping charges if it is necessary to ship the product for service. However, if the necessary repairs are covered by the warranty, we will pay the return shipping charges to any destination within the country of service.
- Wherever warranty service is required, you must present the original dated sales receipt, invoice, or other proof of purchase.
Limitation of Implied Warranties
All implied warranties, including warranties of merchantability and fitness
for a particular purpose, are limited in duration to the length of this
warranty.
Exclusion of Damages
PSB Speakers’ liability for any defective product is limited to repair or
replacement of the product at PSB’s option. PSB shall not be liable for damage
to other products caused by any defects in PSB’s products, damages based upon
inconvenience or loss of use of the product, or any other damages, whether
incidental, consequential, or otherwise.
How State (Provincial) Law Relates to the Warranty
Some states (provinces) do not allow limitations on how long an implied
warranty lasts and/or do not allow the exclusion or limitation of incidental
or consequential damages. Therefore, the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may
also have other rights, which vary, from state (province) to state (province).
This warranty is enforceable only inside the country of purchase, its
possessions or territories. Keep this warranty statement including the
registration date with your proof of purchase for your records.
A Member of The Lenbrook Group of Companies I 633 Granite Court, Pickering, Ontario, L 1W 3K1 www.psbspeakers.com
WARNING
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERTTHE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE
CAUTION REGARDING PLACEMENT
To maintain proper ventilation, be sure to leave a space around the unit (from
the largest outer dimensions including projections) than is equal to, or
greater than shown below.
- Left and Right Panels: 10 cm
- Rear Panel: 10 cm
- Top Panel: 10 cm
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. The apparatus should only be used in moderate climates.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 1 S of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
CAUTION
-
Changes or modifications to this equipment not expressly approved by Bluesound Professional for compliance could void the user’s authority to operate this equipment.
-
This device complies with Part 1 S of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
-
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
-
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Marking and rating plate can be found at the bottom enclosure of the apparatus. -
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
-
Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
-
Operating temperature: 0~35 degrees Celsius
NOTES ON ENVIRONMENTAL PROTECTION
At the end of its useful life, this product must not be disposed of with
regular household waste but must be returned to a collection point for the
recycling of electrical and electronic equipment. The symbol on the product,
user’s manual and packaging point this out. – The materials can be reused in
accordance with their markings. Through re-use, recycling of raw materials, or
other forms of recycling of old products, you are making an important
contribution to the protection of our environment.
Your local administrative office can advise you of the responsible waste
disposal point.
INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES (DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF EUROPEAN UNION) (FOR EUROPEAN CUSTOMERS ONLY)
- Batteries bearing any of these symbols indicate that they should be treated as “separate collection” and not as municipal waste. It is encouraged that necessary measures are implemented to maximize the separate collection of waste batteries and to minimize the disposal of batteries as mixed municipal waste.
- End-users are exhorted not to dispose waste batteries A A as unsorted municipal waste. In order to achieve a Hg Cd high level of recycling waste batteries, discard waste batteries separately and properly through an accessible collection point in your vicinity. For more information about collection and recycling of waste batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.
By ensuring compliance and conformance to proper disposal of waste batteries, potential hazardous effects on human health is prevented and the negative impact of batteries and waste batteries on the environment is minimized, thus contributing to the protection, preservation and quality improvement of the environment.
HAVE QUESTIONS? GET IN TOUCH
support.psbspeakers.com
support@psbspeakers.com
North America: 1 855 531 4666
EU: 00 800 53 14 66 66
RESPONSIBLE PARTY
Len brook International
633 Granite Court
Pickering, ON L 1 W 3Kl
Canada
Tel: 1 905 8316555