SAVANT ESS-APPC3V15C40 Power Director System User Guide
- June 5, 2024
- SAVANT
Table of Contents
SAVANT ESS-APPC3V15C40 Power Director System
Box Contents
-
(1) Director (ESS-APPC3V15C40)
(2) SmartEnergy Voltage Sensor (SEM-VT01) -
(2) 2.4-5 Ghz Antenna (045-0137-xx)
-
(1) USB WiFi Adapter (069-0052)
-
(1) 5V 3A DC 15w Power Supply (025-0233-xx)
-
(2) Side Mount Chassis Bracket (071-0628)
-
(1) 6 Pin Screw Down Plug-in Connector (028-0664-xx)
-
(15) 2 Pin Screw Down Plug-in Connectors (028-0884-xx)
-
(1) Product Regulatory Statement (009-1950-xx)
Accessories (Sold Separately)
SmartEnergy Voltage Sensor (SEM-VT01-xx)
Split Core Current Transformers (Clamp on) with 8ft Leads (SEM-xxxAx)
Front Panel
Right Panel
-
A Reset Press and hold for 5 seconds to reset to factory defaults.
-
B Test Press and release to enter Access Mode.
-
C Pair Press and hold the Pair button for two seconds to enter Associate Mode.
-
D GPIO GPIO Port to control devices.
-
E Ethernet 8-pin RJ-45 port 10/100/1000 Base-T auto-negotiating port.
-
F RS232 RS232 Control Port
-
G Power Supply 120V AC to 5V 3A DC external power supply
-
H Power LED Green: System has power and is operating normally.
Off: System is not receiving power. -
I Status LED
Off: Disconnected from power supply. Amber: Host is booting/rebooting and is disconnected from the network.
Green: Connected to the local network and is assigned an IP Address. -
J VT Connections (3) Voltage sensor input ports. Input for SEM-VT01 voltage sensor.
-
K CT Connections (15) Input ports for each Current Transformer installed in the system.
-
L Wifi + BLE Adapter Provides BLE connection to Companion Modules.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>