brennenstuhl HL 500 A LED Rechargeable Hand Lamp Instruction Manual
- October 27, 2023
- brennenstuhl
Table of Contents
brennenstuhl HL 500 A LED Rechargeable Hand Lamp
Safety Information
- Read the operating instructions carefully before using the lamp.
- Never use the lamp if damaged – danger to life! Contact a qualified electrician or the service department listed.
- Do not look directly at the lamp.
- Do not open the device.
- Do not use the lamp in potentially explosive atmospheres – danger to life!
- Only used a tested USB power source to charge the batteries.
Operation
- Drain the battery completely and recharge before using the lamp for the first time.
- Front switch 1 :
- Press 1x: top LED on
- press 2x: Front LEDs 100%
- press 3x: Front LEDs 50%
- press 4x: all LEDs off.
- The product can be used during charging.
- Battery indicator 5 : red during charging, green when the battery is fully charged.
- If the lamp is not used for an extended period of time, it is recommended that the battery be charged every 3 months.
Overview of the Controls
- On/Off switch
- LEDs front
- LED lamp head
- Charging port
- Charging indicator (red/green)
- Rotating hook
- Magnets
- USB charging cable
Charging the battery
Only charge your battery using a USB cable.
Only use a tested USB power source (e.g. charger, computer) with a maximum 5V
output voltage:
Connection: USB source – USB charging cable 8 – Charging port 4
Specifications
- LEDs: Front 6x SMD, head 1x CREE
- Battery: Integrated, Li-ion 3.7 V / 2.5 Ah
- Charging input: Micro USB 5 V DC, limited internally to 1 A
- Operating time max.: Front 6 hrs, head 10 hrs
- Charging time: ~ 4 hrs
- Protection class: IP 20
- Temperature range: -10 °C – +40 °C
Batteries and accumulators must not be disposed of in the household
waste!
As a consumer, you are legally obliged to hand in all batteries and
accumulators at a collection point in your community/ urban district or in the
trade, so that they can be disposed of in an environmentally friendly manner,
otherwise there are possible risks to the environment and human health.
Conformity declaration
The Declaration of Conformity is filed with the manufacturer.
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG · Seestr. 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S. ∙ 4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag ∙ Blegistrasse 13 · CH-6340 Baar
Please visit the Service / FAQ section of our homepage,
www.brennenstuhl.com, for more information.
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com