Zamkol ZK706 Pro Portable Wireless Speaker User Manual

Zamkol ZK706 Pro Portable Wireless Speaker

Packing List

Product Illustration

Charging

Note:

•  Please fully charge the built-in battery before the first use.
•  When the battery is less than 10% power remaining, the speaker will power off automatically.

Buttons Overviews

• Power Button
  (0)|

Press and hold it for 2s

| Power on| White light on
---|---|---|---
Power off| All LED indicators off

• Light Button****
  | Short press once| Switching light patterns
  ---|---|---
• Volume Button****
  ❖| Short press| Volume up
  ---|---|---
  Press and hold it for 2s| Next track
  | Short press

Press and hold it for 2s

| Volume down

Previous track

Multifunctional Button (MFB)

i1

Music mode

| Short press

Press and hold it for 2s

| Play/pause

Activate Siri

---|---|---
8

Conversation mode

| Short press| Answer phone call
Press and hold it for 2s| Reject phone call
Short press| End outgoing call

Bluetooth Button

| Short press

Press and hold it for 3s

| Enters  pairing mode

Host enters to True Wireless Stereo pairing mode

---|---|---

Pairing Mode

1.  When powered on, the speaker automatically reconnects to the previously connected device.
2.  Go to Bluetooth settings on your mobile device, then search and select “Zamkol ZK706 Pro” from devices list.
3.  Once paired , the Bluetooth indicator will turn solid blue.

Note:

1.  Make sure that the speaker is within 10 meters from your mobile device.
2.  When powered on, the speaker will automatically reconnect to the last connected device.

True Wireless Stereo Connection between Two ZK706 Pro

1.  Press and hold the ” * ” button for 3s to enter into True Wireless Stereo pairing mode as the host.
2.  Enable the Bluetooth on your device and connect to “Zamkol ZK706 Pro”, the stereo sound will play from both speakers.
3.  Once paired, the main speaker blue indicator light is always on.

Factory Reset and Reconnect

1.  If this speaker becomes disconnected or has another connecting problem, you can press and hold II Bluetooth II buttons simultaneously for 1 Os at least to clear the pairing of speaker and remove the old pairing in your Bluetooth device, and then pair again.
2.  If this speaker becomes out of control and can’t be powered off, you can press and hold the play button for 1 Os at least to reboot.

Product Specifications

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/fV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>