WATTECO Vaqa’O, Vaqa’O+ Indoor THR, Indoor TC User Guide
- June 3, 2024
- WATTECO
Table of Contents
WATTECO Vaqa’O, Vaqa’O+ Indoor THR, Indoor TC
Start
Provision the device on your LoRaWAN® network with the keys available on a secure platform.
ON
OFF
Video :
ON – OFF
https://youtu.be/SiErE0zy4Q0
Installation
Setting up
The installation should be done on a wall at a height of 1.5m from the ground. Away from windows, a heat source (sun, radiator, ventilation, intake).
Wall mounting
The cover of the base must be removed with a flathead screwdriver.
Place the dowels and screw the base to the wall, in the direction indicated.
Installation of the cover
Radio propagation
For the sensor communicates correctly, the number of obstacles should be limited to avoid excessive radio attenuation.
Characteristics
Reference| 50-70-168| 50-70-074| 50-70-162|
50-70-167
---|---|---|---|---
Class| A| A| A| A
Power Level| +14 dBm| +14 dBm| +14 dBm| +14 dBm
**Humidity**
CO2 COV
__**Atmospheric pressure**
__**Motion detection**
| x x x x| x x x x x x x| x
x| x
Antenna| Internal| Internal| Internal| Internal
Casing materials| ABS UL94 V0| ABS UL94 V0| ABS UL94 V0| ABS
UL94 V0
IP rating| IP30| IP30| IP30| IP30
SITE SUPPORT
https://support.watteco.com/
CERTIFICATIONS
Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-168/50-70-074/ 50-70-162/50- 70-167 is in conformity with Directive 2014/53/EU (RED). The full text of the EU Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance /download-center/
Thanks for choosing WATTECO devices