RYOBI RCF4 Clamp Fan Instruction Manual

: June 16, 2024
: RYOBI

Table of Contents

RYOBI RCF4 Clamp Fan
Product Information
Product Usage Instructions
FAN SAFETY WARNINGS
KNOW YOUR PRODUCT
MAINTENANCE
SYMBOLS ON THE PRODUCT
How To Use
Product Specifications
RYOBI WARRANTY APPLICATION CONDITIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RYOBI RCF4 Clamp Fan

RYOBI-RCF4-Clamp-Fan-product

Product Information

Specifications:

Model: RCF4
Manual Link: https://manual-hub.com/

Important Safety Instructions:
You must read the instructions in this manual before assembling, maintaining, and operating the product.

Attention!
You must read the instructions contained in this manual before assembling, maintaining and using the product.

Danger!
You must read the instructions in dieser Anleitung for assembly, maintenance and use of the product.

Attention!
It is important to read the instructions contained in the present manual before mounting the product, carrying out maintenance operations on the same and putting it into operation.

Product Usage Instructions

Intended Use:

The clamp fan is intended for general ventilation in most household spaces.
Do not use the product for any other purpose. Use of the product for operations other than intended could result in a hazardous situation.

Fan Safety Warnings:

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
The product is intended for use only when it is clamped. Do not use the product with it resting on any surface.
Do not use the product to exhaust hazardous or explosive materials and vapours. The product is intended for general ventilation only.
Stay alert, watch what you are doing, and use common sense when operating the product. A moment of inattention while operating the product may result in serious personal injury.
It is possible that unsecured hair may be drawn into the product and may become entangled, causing injuries. Keep loose or flying hair away from the product at all times.
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes into contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.

FAQ

Q: What is the intended use of the clamp fan?
A: The clamp fan is intended for general ventilation in most household spaces.
Q: Can children use the clamp fan?
A: This appliance can be used by children aged 8 years and above and persons with supervision or instruction concerning the use of the appliance in a safe way and understanding the hazards involved. However, children should not play with the appliance and cleaning and user maintenance should not be done by children without supervision.
Q: Can I use the clamp fan without clamping it?
A: No, the product is intended for use only when it is clamped. Do not use the product with it resting on any surface.
Q: Can I use the clamp fan to exhaust hazardous or explosive materials and vapours?
A: No, the product is intended for general ventilation only. Do not use it to exhaust hazardous or explosive materials and vapours.
Q: What precautions should I take while operating the clamp fan?
A: Stay alert, watch what you are doing, and use common sense when operating the product. A moment of inattention while operating the product may result in serious personal injury. Keep loose or flying hair away from the product at all times to avoid entanglement.
Q: What should I do if battery leakage occurs under extreme usage or temperature conditions?
A: If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.

Important!
You must read the instructions in this manual before assembling, maintaining and operating the product.

ORIGINAL INSTRUCTIONS
Safety, performance, and dependability have been given top priority in the design of your clamp fan.

INTENDED USE

The clamp fan is intended for general ventilation in most household spaces.
Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

FAN SAFETY WARNINGS

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
The product is intended for use only when it is clamped. Do not use the product with it resting on any surface.
Do not use the product to exhaust hazardous or explosive materials and vapours. The product is intended for general ventilation only.
Stay alert, watch what you are doing, and use common sense when operating the product. A moment of inattention while operating the product may result in serious personal injury.
It is possible that unsecured hair may be drawn into the product and may become entangled, causing injuries. Keep loose or flying hair away from the product at all times.
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.
Rechargeable batteries are to be removed from the product before being charged.
Exhausted batteries are to be removed from the product and safely disposed of.
If the product is to be stored unused for a long period, remove the batteries.
Do not use non-rechargeable batteries in place of rechargeable batteries.
The supply terminals are not to be short-circuited.
Do not use modified or damaged batteries.
Do not expose the product or battery to excessive temperatures.
Be aware of the risk of terminals of the battery-operated appliance or battery being short-circuited by metal objects.

BATTERY SAFETY WARNINGS

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack, or charger in fluid or allow fluid to flow inside it. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
When the battery is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion.

CHARGING THE BATTERY PACK WITH A USB-C CABLE

Battery packs are shipped in a low-charge condition to prevent possible problems. Therefore, they should be charged before first use. If the charger does not charge the battery pack under normal circumstances, return both the battery pack and charger to your nearest authorised service centre for an electrical check.
Refer to the battery operator’s manual for charging instructions.

TRANSPORTING LITHIUM BATTERIES
Transport the battery per local and national provisions and regulations.

Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, nonconductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

Adjustable head
LED indicator
2-speed switch
Clamp
Rotatable stand
Battery port
USB charging cable
Operator’s manual
USB power adaptor

$RYOBI-RCF4-Clamp-Fan-fig- $1$$

MAINTENANCE

Use only original accessories and spare parts. Should components that have not been described need to be replaced, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

SYMBOLS ON THE PRODUCT

Direct current
Please read the instructions carefully before starting the product.
Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste. Waste batteries and waste electrical and electronic equipment must be collected separately. Waste batteries, waste accumulators, and light sources have to be removed from the equipment. Check with your local authority or retailer for recycling advice and collection points. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge. Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand for raw materials. Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and human health if not disposed of in an environmentally compatible manner. Delete personal data from waste equipment, if any.

How To Use

$RYOBI-RCF4-Clamp-Fan-fig- $2$$ $RYOBI-RCF4-Clamp- Fan-fig- $3$$ $RYOBI-RCF4-Clamp-Fan-fig- $4$$

Product Specifications

Product specifications|
---|---
Clamp Fan| **
Model| RCF4
Voltage| 4 V
Fan speed| 3800/2300 rpm
Airflow| 120/90 m3/hr
Drum diameter| 9,5 cm
Drum tilt| 180°
Drum rotation| 325°
Weight – excluding battery pack| 0,29 kg
Weight – according to EPTA Procedure 01/2014| 0,35 kg (2,0Ah)
Battery and charger**|
---|---
Compatible battery packs| RB4..
Battery type(Lithium- Ion)|
Normal temperature range for charging the battery| 10°C – 38°C

RYOBI WARRANTY APPLICATION CONDITIONS

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only to new products.
There is a possibility to extend a part of the range of power tools (AC/DC) warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for the extended warranty is displayed in stores and/or on packaging and is contained within the product documentation. The end user is required to register his/her newly acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
- any damage to the product that is the result of improper or lack of maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any product not displaying the CE approval mark on the rating plate
- any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately, including but not limited to screwdriver bits, drill bits, abrasive discs, sandpaper and blades, lateral guide, etc.
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
For servicing, the product must be sent or presented to a RYOBI-authorised service station listed for each country in the following list of service station addresses. In some countries, your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with the sender’s address and accompanied by a short description of the fault.
A repair/replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries, delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE
Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.

RYOBI is a trade mark of Ryobi Limited and is used under license.