brennenstuhl OLI 400 AS Rechargeable Solar LED Outdoor Light Instruction Manual
- June 1, 2024
- brennenstuhl
Table of Contents
brennenstuhl OLI 400 AS Rechargeable Solar LED Outdoor Light
Specifications
- Protection Class: IP65
- Temperature Range: -10°C to 40°C
- Storage Temperature Range: -20°C to 60°C
- Battery: 18500 Li-Ion 3.7V / 3000mAh
- Charging Input Connector: USB Type C 5V / 2A
- Charging Time: Approx. 3 hours
- Powerbank Output: 5V / 2A
- Dimensions: 7.6cm x 5.9cm x 8cm
- Weight: 0.212kg
Product Usage Instructions
Safety Instructions
Before using the product, carefully read and follow the safety instructions provided with the product. Ensure the product is used in accordance with the guidelines to prevent any accidents.
Commissioning
- All functions can be dimmed variably from 100% to 5% and back by pressing and holding the on/off switch.
- To activate different lighting sequences, follow the instructions on dimming the light, activating the spotlight, ring lights, and SOS flash.
- Ensure the housing is securely closed after adjusting the settings.
Powerbank Function
The product has a power bank function that allows you to charge devices with 5V / 2A. The charging socket is located under the \output cap on the side of the light. When using the power bank function, the light can be used with 50% luminosity.
Scope of Delivery
The package includes the light, an 80 cm USB Type C/C cable, and a USB Type A adapter for charging convenience.
FAQ
- Can the light source be replaced?
- No, the light source cannot be replaced. If it malfunctions, the entire luminaire must be disposed of properly.
- How can I dispose of the product?
- Dispose of electrical appliances in an environmentally friendly manner. For proper disposal, refer to your local authority’s guidelines on recycling electronic equipment.
Attention: Please read these instructions for use carefully before using the product and then keep them in a safe place.
SAFETY INSTRUCTIONS
Please observe the general safety instructions enclosed with the product, which can also be found at service.brennenstuhl.com.
The product is not IP54 (dust and splash-proof)
- during the charging process
- while using the USB output
The light source cannot be replaced; if it loses its function, the entire luminaire must be disposed of. The luminaire contains a light source of energy efficiency class F – 0172640163.
TECHNICAL DATA
- Protection class: III
- Protection class: IP54
- Temperature range: -10°C – +30°C
- Storage temperature range: -10°C – +30°C
CONTROL UNITS
- Switch with switching steps
- Charging socket input
- Charging socket output
- LED spotlight
- LEDs ring-shaped
- Charging indicator
- Solar panel
- Fold-out hook
COMMISSIONING
Sequences function
- All functions of this sequence can be dimmed variably from 100% to 5% and back by pressing and holding the on/off switch (1). Off Battery indicator Spot-on (long press = dimming) Spot-on plus ring-on (long press = dimming) –> Ring-on (long press = dimming) –> Off.
- Off –> Battery indicator –> Press and hold = SOS –> flash –> Off.
CHARGING THE BATTERIES
- To ensure optimum function, we recommend that the battery is fully discharged and fully recharged the first time it is used.
- The charging socket is located under the “Input” cap (2) on the side of the light.
- The charging indicator flashes during the charging process. When the battery is fully charged, the LEDs light up permanently.
- If the battery is not used for a long period of time, recharge it approximately every 3 months to ensure a long battery life.
- The product can be operated while charging.
- After charging, be sure to close the charging socket again with the sealing cap.
REPLACING THE BATTERIES
You can replace the 2 x 18500 standard batteries by unscrewing and removing
the upper part of the housing. Use the symbols on the black part of the
housing as a guide (arrow from closed lock to open lock). Ensure that the
batteries are reinserted in the correct position.
Then replace the upper part of the housing and close it firmly so that the arrow mark is above the closed lock symbol.
POWER BANK FUNCTION
The product has a power bank function that you can use to charge devices with 5 V / 2 A. The charging socket is located under the “Output” cap (3) on the side of the light. When using the power bank function, the light can be used with 50% luminosity.
SCOPE OF DELIVERY
Light, 80 cm USB type C/C cable, USB type A adapter.
EU DECLARATION OF CONFORMITY
UKCA DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electrical appliances in an environmentally friendly manner! Electrical appliances do not belong in household waste!
In accordance with European Directive 2012/19/EU on waste electrical and electronic equipment, used electrical appliances must be collected separately and recycled in an environmentally friendly manner. You can find out how to dispose of your old appliance from your local authority. For further information, we recommend the Service/FAQs section on our homepage www.brennenstuhl.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>