brennenstuhl WA 3000 XS01 WiFi Socket Instruction Manual

June 4, 2024
brennenstuhl

brennenstuhl WA 3000 XS01 WiFi Socket-

WA 3000 XS01
WiFi socket
Operating instructions

SAFETY INSTRUCTIONS

WARNING! RISK OF DEATH AND ACCIDENTS FOR INFANTS AND CHILDREN!
Never leave children unattended with the packaging material There is the danger of suffocation through ingestion or inhalation of small parts or films. Children often tend to underestimate the dangers. Keep the device away from children. It is not a toy.

  • This device can be used by children from 8 years as well as persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge provided that they have been given supervision or instruc concerning the safe use of the device and that they understand the resulting risks. Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.
  • Operate the device in a dry and dust-free environment only.
  • Operate the device in an indoor environment only.
  • Do not expose the device to unfavorable influences such as
    • Humidity,
    • Constant sunlight,
    • Heat radiation,
    • Cold,
    • Vibrations.

CAUTION!
RISK OF INJURY!
We will not assume any liability for material damage or personal injury caused by improper handling or non-observance of the safety instructions! In such cases, the warranty/guarantee will become null and void!
Any other use than those described in these instructions will lead to damage of the device. Do not undertake structural modifications to the device. Otherwise, a safe operation cannot be assured.

ATTENTION! RISK OF ELECTRIC SHOCK!

  • Do not open the housing. The device does not contain any serviceable parts.
    In case of a malfunction, please contact the service. Have worked at the power network carried out by a specialised electrician, in the de-energized condition only.

  • The device is not suitable for isolation. The load is not separated from the mains galvanically.

  • Do not commission the device if there is visible damage.

  • Do not connect several WiFi sockets in series.

  • In case of failures, unplug the device from the socket immediately.

  • De-energized only when disconnected.

ATTENTION! RISK OF FIRE!

  • Do not connect any end devices at the device the unsupervised switch-on of which could cause fire or other damage (e.g. iron).
  • Do not switch the device in an uncontrolled manner or without supervision.
  • Do not use an extension cable.
  • Make sure that the socket is installed close to the connected device, that it is easily accessible and that it is not operated while it is covered.
  • Avoid any overloading of the device.
  • Any overload may result in a risk of fire or damage to the device.
  • The maximum capacity is 3000 W.
  • Do not connect in series.

INTENDED USE

The WiFi socket is only intended to switch on and off loads connected to the socket in dry indoor areas.

INSTALLATION INFORMATION /DISTANCE TO SOURCES OF INTERFERENCE

This device works with the 2.4 GHz b/g/n WiFi protocol. The reach within buildings may strongly differ from the one in open areas.
Apart from the transmission power and the reception properties of the receivers, environmental influences such as air humidity and the structural situation on-site play an important role.
The reach may be considerably reduced by:

  • Walls made of wood, plasterboard, concrete, reinforced concrete
  • Proximity to metal and conductive objects
  • Broadband interference, e.g. in residential areas (DECT phones, mobile phones, radio headphones, radio speakers, radio weather stations, baby monitoring systems)
  • Proximity to electric motors, transformers, power supply units, computers

SCOPE OF DELIVERY
1 x WiFi socket WA 3000 XS01
1 x operating instructions

TECHNICAL SPECIFICATIONS

Designation of the product:
Art. no.:
Radio frequency:
Frequency band:
Max. transmitting power:  Wireless IEE standards:
Operating voltage:
Switching power:
Nominal current:
Ambient temperature:
IP class:| WA 3000 XS01
1 29485 0 (DE) / 1 29485 1 (FR)
2.4 GHz WiFi
2.412-2.484 GHz
< 100mW
IEEE 802.11b /g /n
230 V ~ 50 Hz
Max. 3000 W
13A
0°C to 35°C
IP20
---|---

Device corresponds to protection class I, contamination: 2, rated impulse voltage: 2500 V, Operating mode: S1, 1E4, PTI175, level: 3, one-pole switch- off, non-replaceable built-in fuse: Thermal fuse: 250V~ 2A 76°C Technical modifications reserved.

DEVICE OVERVIEW

brennenstuhl WA 3000 XS01 WiFi Socket-fig1

LED Status:
– Constantly lit in green: Device is connected to the Internet.
– If the LED flashes green, the device is in the teaching mode.
– If the device is switched on (ON), the LED is lit in red.

FUNCTION
The WiFi socket is part of the brennenstuhl®Connect system which is controlled via the brennenstuhl®Connect app. The WiFi socket can be directly connected to the router.
PREPARATIONS
Connect the WiFi socket to an easily accessible socket. The local mains voltage must comply with the technical data of the WiFi socket (see “Technical data”). Before the commissioning, check the power consumption of the load that you want to connect to the WiFi socket. The maximum capacity is 3000 W.

DOWNLOADING THE APP / BRENNENSTUHL®CONNECT
The WiFi socket is controlled using the brennenstuhl®Connect app.
The app is available free of charge at the App Store and on the Google Play Store. For the download and the installation, follow the instructions on the screen.

Google, Google Play and Google home are trademarks of Google LLC.
Apple and the Apple logo are trademarks of Apple Inc. App Store is a service mark of Apple Inc.
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affliates.

COMMISSIONING THE WIFI SOCKET

  1. Start the brennenstuhl®Connect app.
  2. Using the “+” symbol, you can add new devices.
  3. Use the article number in the device overview to select the device to be installed..
  4. Set the WiFi socket into the teaching mode by keeping the teaching button pressed for about 3 sec.
  5. Follow the instructions in the app to connect the WiFi socket with your network.

COMPATIBLE WITH AMAZON ALEXA AND THE GOOGLE ASSISTANT
The device is compatible with Amazon Alexa and the Google Assistant. For Amazon Alexa, download the brennenstuhl®Connect Skill and search for the WiFi socket. For the Google Assistant, select the Google Home App and click “Add” » “Set-up device”. Then follow the screen menu.

CLEANING THE DEVICE
ATTENTION! RISK CAUSED BY ELECTRIC SHOCK!
Before cleaning, separate the device from the power network. Make sure that no liquid penetrates the device. Penetrating liquid may cause a short circuit.

  • Clean the device with a dry, non-linting cloth. In case of more serious contamination, you can slightly moisten the cloth.

  • Do not use solvent-containing detergents for the cleaning.
    Otherwise, the surface and labelling of the device may be damaged.

  • Never immerse the device in water or any other liquids.
    Otherwise, the device may be damaged.

  • Ensure that the device is completely dry before the next use.

DISPOSAL
The packaging is made of environmentally friendly materials which can be disposed of via the local recycling centres.
For possibilities of disposal of the used product, please contact your local or municipal administration.
**** When your product has come to the end of its working life, it should not be disposed of with domestic waste in terms of environmental protection. Please dispose of it correctly. You can obtain further information on collection points and working hours from your competent administrative authority.

SERVICE
If you have questions concerning the product, please do not hesitate to contact us at www.brennenstuhl.com. Phone: 00 800 48 72 0 74 1 (free of charge)

MANUFACTURER
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 ∙ D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 ∙ CH-6340 Baar
www.brennenstuhl.com

SIMPLIFIED EU DECLARATION OF CONFORMITY
We, the Hugo Brennenstuhl GmbH & Co.KG, herewith declare that the remote system type WA 3000 XS01 complies with the directives 2014/53/EU and
2011/65/EU. The complete text of the EU declaration of conformity is available at the following web address:
www.brennenstuhl.com/konformitaetserklaerung/ke_1294850.pdf
www.brennenstuhl.com/konformitaetserklaerung/ke_1294851.pdf
This device complies with all legal, national and European requirements.
All company names and product designations contained herein are trademarks of the respective owners.
All rights reserved.

Smart up your home.
www.brennenstuhl.com
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 ∙ D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 ∙ CH-6340 Baar
www.brennenstuhl.com
0499857/4020
089119 BA_BrennenstuhlConnect WiFi-Steckdose IP20.indd 1
https://tm.by

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

brennenstuhl User Manuals

Related Manuals