BITMAIN AntMiner S9k 14T Bitcoin Miner Installation Guide
- June 6, 2024
- BITMAIN
Table of Contents
S9k Server
Installation Guide
Document Version 1.0
Jun. 2019
© Copyright Bitmaintech Pte. Ltd. 2007 – 2019. All rights reserved.
Bitmaintech Pte. Ltd. (Bitmain) reserves the right to make corrections,
modifications, enhancements, improvements, and other changes to its products
and services at any time and to discontinue any product or service without
notice.
Customers should obtain the latest relevant information before placing orders
and should verify that such information is current and complete. All products
are sold subject to Bitmain’s terms and conditions of sale supplied at the
time of order acknowledgment.
Bitmain warrants the performance of its products to the specifications
applicable at the time of sale in accordance with Bitmain’s standard warranty.
Testing and other quality control techniques are used to the extent Bitmain
deems necessary to support this warranty.
Except where mandated by government requirements, testing of all parameters of
each product is not necessarily performed.
Bitmain assumes no liability for third‐party applications assistance.
Customers are responsible for their products and applications using Bitmain
components. To minimize the risks associated with customer products and
applications, customers should provide adequate design and operating
safeguards.
Bitmain does not warrant or represent that any license, either express or
implied, is granted under any Bitmain patent right, copyright, or other
Bitmain intellectual property right relating to any combination, machine, or
process in which Bitmain products or services are used. Information published
by Bitmain regarding third‐party products or services does not constitute a
license from Bitmain to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a
third party under the patents or other intellectual property of the third
party, or a license from Bitmain under the patents or other intellectual
property of Bitmain.
Resale of Bitmain products or services with statements different from or
beyond the parameters stated by Bitmain for that product or service voids all
express and any implied warranties for the associated Bitmain product or
service and is an unfair and deceptive business practice. Bitmain is not
responsible or liable for any such statements.
All company and brand products and service names are trademarks or registered
trademarks of their respective holders.
All text and figures included in this publication are the exclusive property
of Bitmaintech Pte. Ltd.
(Bitmain), and may not be copied, reproduced, or used in any way without the
express written permission of Bitmain. Information in this document is subject
to change without notice and does not represent a commitment on the part of
Bitmain. Although the information in this document has been carefully
reviewed, Bitmain does not warrant to be free of errors or omissions. Bitmain
reserves the right to make corrections, updates, revisions, or changes to the
information in this document.
Bitmaintech Pte. Ltd.
Tel:+86‐400‐890‐8855
www.bitmain.com
Overview
The S9k server is Bitmain’s newest version in the S9k server series. All S9k servers are tested and configured prior to shipping to ensure easy setup.
- You must provide your own ATX power supply.
- Please refer to the layout above to place your goods in usage in case of any damage.
S9k Server Components
The main components and controller front panel of the S9k server are shown in the following figure:
Connecting to the Power Supply
1. Remove the screw at the position indicated by A with a cross screwdriver.
2. Lift the upper cover of the control board upward in the direction indicated by the arrow shown in the figure and then pull it in the upper rear direction.
3. The position and name of the socket are shown in the figure below after removing the upper cover of the control board.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>