DDPAI X5 Pro Dash Cam User Guide

X5 Pro
Dash Cam
User Guide

Product parameters

• Product name: Recorder
• Product model: X5 Pro
• Product size: 102.8’64.6433.3mm
• Product specification: 12V/1A
• RAM: 4Gb
• GPS: Built-in high-precision sub-meter GPS module
• G-Sensor: Built-in six-axis gyroscope, collision latches, sensitivity can be adjusted through App.
• (Storage: Built-in eMMC with a storage capacity of 32G, external TF can support 128G at the maximum (adaptive to Class 10 above)
• (Wireless module: Built-in 5GHz Wi-Fi Wireless module
• (Picture pixel: front 384042160, rear 1920’1080
• (Video: the front can support 2160P@30fps, the rear can support 1080P@25fps
• Front lens: 7-set HD glass lens, diagonal 140°, F1.8 aperture
• (Rear lens: 5-set HO optical lens, diagonal 125°, F2.0 aperture

Packing list

Product outline

Description of indicator light

Product outline

1. Disconnect the power supply of the vehicle.
2. Take out all wires inside the packing box and locate the power cable and the terminals include:

1. Red ACC wiring terminal
   2)YellowVCC wiring terminal
2. Black GNO wiring terminal

3. Arrange the power cable to the fuse box along with the front windshield, A-pillar, the compartment in the driving room. The wiring layout is shown as the below figure. The front recorder should be mounted and fixed on the front windshield, somewhere around the rearview mirror. The optimal mounting area is shown below.
   Fuse box position: For most of the vehicles, the fuse box is at the left of the driving seat or near the steering wheel.
   Please refer to the operation manual of vehicles.

4. Connect black line (GND) to the ground wire inside the fuse box of the vehicle.

5. Connect red line (ACC) to the +12VDC power supply for ignition control in the fuse box.

6. Connect the yellow line (VCC) to the 12VDC power supply inside the fuse box. The power supply is always on and will not be controlled by the ignition.

7. Connect the black rear signal line to the rear camera, and then arrange the wires to the rear lens position of the vehicle as shown in the figure. The installation position and wiring layout of the rear camera is shown in the below figure.

Note: The rear camera can only be mounted inside of the vehicle and do not place it outside of the vehicle. When the vehicle starts, the recorder will turn on automatically and sound a prompt tone (Hello, DOPAI), indicating that it has come into the normal functional state.

APP operation

DDPAI has a built-in Wi-Fi module that the mobile phone can be directly connected to it to set up a wireless LAN. Through the wireless data transmission, you can preview the video in real-time, playback the driving video, download and share the driving video and photos from the “DDPAI” App in your mobile phone. These operations will not consume your mobile phone traffic.
Description: The built-in Wi-Fi of recorder cannot be used as mobile data for surfing the internet or function as a mobile hotspot.

Download DDPAI App

http://a.app.qq.com/o/simple.jsp?pkgname=com.vyou.vcameraclient

Scan the aboveQR code or search “DDPAI” from iPhone/ Android App store and download it.

Connect to the recorder via mobile phone Wi-Fi
After the power of the recorder is on, you will hear a voice of “Hello, DDP”, indicating that it has been successfully electrified.

1. Make sure that the recorder and mobile phone are within 5m.
2. Enter the DDP App of the mobile terminal and select “device >+ connect to new device” from the homepage to select the corresponding device.
3. Select the recorder Wi-Fi from the list to connect
   (1)Android phone: Select “DDPAI_X5 Pro_XXXX” from the the-Fi list and input password 1234567890 to connect to recorder-Fi.
   (2) iOS phone: Select and enter the “WLAN” interface from the setting and select “DDPAI_X5 Pro_XXXX” from the scanned Wi-Fi list and input password 1234567890 to connect to the recorder Wi-Fi.

Video preview and playback

Video review: After the mobile phone successfully the recorder, select “device

enter recorder” from the homepage to enter the “real-time/playback” interface to preview and current recording image.
Video playback: Enter the preview interface and there is a progress bar under the preview interface, the video can be playback by dragging the progress bar.
Recorder setting
Enter the preview interface and there is a setting icon at the right top corner of the preview interface, click to enter and set according to your preference.

Precautions **

**

Please carefully read all precautions and operation instructions before use to ensure to use it correctly and safely.

1. Please do not debug the DDP recorder or watch a video through your mobile phone during driving.
2. Please do not mount the DDP recorder at places where may block the view of driving.
3. Please make sure the power cord in the package, as other power cords may result in the malfunction of the product due to incompatibility.
4. 128GB TF card is supported, please make sure to select Class 10 high-speed card. Do not plug or unplug the TF card during operation.
5. Please format the TF card through APP before use, otherwise, it may not be readable.
6. Please do not dismantle or repair the shell of the DDP recorder without authorization. In case of failure, please contact the official service center for consultation.
7. DDP recorder is not only applicable to vehicles but also applicable to other places. The power supply can be provided through the adapter.
8. The pictures in the manual are for reference only. The physical product should prevail.

Contact Us

Brand: DDPAI (Shenzhen) Technology Co., Ltd.
Hotline: 400-163-0062
Service time: 9:00-18:30 from Monday to Sunday (except statutory holidays)
Official website: www.ddpai.com
Executive standard : GB8898 – 2011, GB/T13837 – 2012, GB17625.1 – 2012
Address: F12 Yihua Financial Technology Building, Software Industry Base, Nanshan District, Shenzhen

http://weixin.qq.com/r/a3U4IHzEpyHYrThD9yB5

For more information, please scan the QR code

Description of hazardous substance status

Toxic and hazardous
substances and elements| Part name
---|---
Plastic shell| Circuit board component| Loudspeaker| Capacitance| Power cord
Plumbum (Pn)| 0| X| 0| X| 0
Mercury (Hg)| 0| 0| 0| 0| 0
Chromium (Cd)| 0| 0| 0| 0| 0
Hexavalent chromium lead (Cr(VI)| 0|  0| 0| 0|  0
Polybrominated biphenyls (PBB)|  0|  0|  0|  0|  0
Polybrominated
diphenyl ethers (PBDE)| 0| 0| 0| 0| 0

The environmental service life of parts: 10 years for circuit board components and power cord, respectively, 5 years for capacitance. The marked environmental service life is only limited to the safe service life that will not leak any toxic and hazardous substances under the use condition specified in the manual.
0 It means that the content of the hazardous substance in all homogeneous materials of the component is lower than the limit stipulated in GB/T26572-2011.
10
X, It means that the content of the hazardous substance in some homogeneous material of the component exceeds the limit stipulated in GB/T26572-2011.

Remark: The content of lead of SMT electronic components (such as, high voltage resistor, ceramic resistor, diode, etc.) with a mark ” x ” for special purpose maybe? -0.1%. The wire core of screws and cables adopts alloy with superior performance; therefore, the content of lead may be>0.1%. These components all comply with the exemption provisions of the EU RoHS Directive. The to technologies and parts that cannot be substituted due to the restriction of global technology development level, the content of lead for the externally exposed parts all complies with the environmental requirements.

Warranty policy

The after-sales service of the product will provide repair, replacement, and refund strictly according to Law of the People’s Republic of China on Protection of Consumer Rights and Interests and Product Quality Law of the People’s Republic of China and the services include:

1. Warranty period

1. Within 7 days from the next day of receiving, the return of goods without reason is acceptable, on the premise that the after-sales service center of DDPAI has Inspected and confirmed that the outline and function of the main device and accessories are in good condition for re-sale with the intact package.
2. Within 15 days from the next day of receiving, free replacement can be entitled if the after-sales service center of DDPAI has confirmed the quality problem of the main device.
3. Within 3 months from the next day of receiving, free replacement can be entitled if the after-sales service center of DDPAI has confirmed the quality problem of the accessories.
4. Within 12 months from the next day of receiving, free maintenance can be entitled if the after-sales service center of DDPAI has confirmed the functional failure of the main device.

2. Non-warranty policy

1. The damage caused by unauthorized disassembling and maintenance of the main device, misoperation (such as falling off, squeezing, immersion, bump, electric shock, and other reasons)
2. The product is not within the warranty period.
3. The damage was caused by force majeure.
4. The failure of accessories is caused by man-made reasons (such as falling off, squeezing, immersion, bump, electric shock, and other reasons).
5. The normal aging, abrasion, and discoloration during use.

Description of hazardous substance status

1. Customer information
   Name:———-
   Telephone No.:——
   E-mail address:——–
   Zipcode:———-
   Correspondence address:

2. Product data
   SN No. on the device:———–

3. Maintenance record

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>