DDPAI 5864147240 Mini Wi-Fi 1080p Dash Camera User Guide
- June 5, 2024
- DDPAI
Table of Contents
DDPAI 5864147240 Mini Wi-Fi 1080p Dash Camera
PACKAGE CONTENTS
PRODUCT OVERVIEW
INSTALLATION
- Clean the area and the windshield where the Dash Cam will be installed, otherwise, it may fall off easily later.
- Remove the protective film from the back of the bracket, and attach the adhesive side of the mount on the windshield where It has an unobstructed view of the road but does not interfere with the driver’s view, As shown below.
- Use the installation tool to lift the edges of the windshield molding and tucK In the power cable. connect the Dash Cam to the car charger [plugged into cigarette lighter socket) and power cable.
- Turn on the engine after installation, you will hear a boot tone, Dash Cam powers up and starts recording, meanwhile, the LED indicator blinks slowly in normal mode.
- Adjust the angle of the lens by rotating the Dash Cam. We recommend pointing the lens slightly downwards (“‘1 0’ below horizontal), so as to record video with a 6:4 road to background ratio. It Is recommended to adJust the Dash Cam position while looking at the screen to select the best viewing angle.
LED INDICATOR
INSTALL DDPAI APP
For Android, and iOS phones, search for “DDPAI” in the Google Play Store or Apple App Store. Download the app and install it on your phone.
Note:
In order to connect to the camera Wi-Fi, please list the App In your trust
a pp II cation list and make sure the camera’s Wi-Fi is on.
APP INSTRUCTION
On the Road
DDPAI users community, here you can find nearby users, see the newest
activities, user experience, installation tutorial, etc.
Camera
Pair Smart Phone 10 Dash Cam
-
- Launch DDPAI App, tap on the camera, then tap on+.
- Choose your DDPAI Dash Cam from the network list (For the Android system, App will start to search the Dash Cam network automatically. For iOS phone: turn on WLAN from Settings ->WLAN” ). The Dash Cameras default SSID (or Wi-Fi name) is DDPAl_mini_XXXX.
-
- Enter the password [the default password is ‘1234567890’ ).
- CIiek ADD CAMERA, wait a few seconds until the preview screen shows.
Preview/ Playback
Connect ta Dash Cam via direct WI-Fl, to see recent videos and real-time
display.
-
- Open the DDPAI App, and add your Dash Cam,
- Select the Camera tab, then tap on the buttons, this will bring you to the preview page.
Rotate your smartphone or press expand 9 icons, and turn the preview screen to landscape mode.
Playback:
Tap and left/right drag timeline bar at the screen bot1om to create the
starting point of 1he recording you wish to preview, then tap on the thumbnail
when you have made your selection, or wait for 5 sec for buffering, now you
can watch the history recording.
Download Images and Videos:
Tap on 9 from the preview screen, you can select Image or video to download.
Download Image flies:
Download manually by Taping on download image tiles from the preview screen,
this will bring you to the download page, you can select or just simply tap on
the images which you want to download. The image files can be downloaded
automatically by Going into “Me-> Settings”, and turn on “Capture files auto-
download”.
Download video files:
- Select download video Illes from the preview screen.
- Drag timeline oar to create the starting point.
- Tap on download icon to start downloading.
- Tap on finish icon O when e you have made your selection,
Social Media Sharing
Taping on the icon to share pictures, and videos on social media like Facebook, Twitter, etc.
Album
View images, videos, and emergency clips, you also can edit and share them from here.
Me
Settings, help center, and about us.
Settings:
From here you can set Dash Cam’s name and password, camera volume, resolution,
GSensor sensitivity, format sd card, and so on.
Help:
How to use the Dash Cam.
About:
Update firmware, contact us, information about the Dash Cam.
UPGRADE APP AND FIRMWARE
Update via App:
If a new version of the firmware is released, opening the app will prompt
you to download it. You can also open the app, enter • Me-> About and click to
detect the new version, the app will automatically download and upgrade.
Upgrade via SD card:
Download the latest firmware for your camera, unzip and copy the content you
have unzipped onto the SD card, then Install the SD card back camera, power on
the camera and it will apply the firmware automatically.
NOTE:
Do not power off your Dash Cam until ii begins continuous recording as it
may cause permanent damage to the Dash Cam.
SPECIFICATIONS
- Product Name: Dash Cam
- Product Model: mini
- CPU: 1 080P @30fps/ HD CPU
- Image Sensor: 2 MP CMOS sensor
- Lans: 4-layer glass, 130′ wide angle, F2.0
- WI-Fl: WI-Fl (2.4GHz)
- Storage: TF card (up to 128GB), loop recording
- Video Output: Wireless video output, support Android/IDS device
- G-Sensor: Built-in 3 Gyro sensor, motion locking, adjustable sensitivity via App
- Video Resolution: 1920’1080 @30fps
- Photo Resolution: 1920’1 080
- RAM: 512Mb
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
Instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment to an outlet on a circuit different from that to which the receiver Is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general AF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
CAUTION
- The product’s optimal temperature range is -20 t: – 70 “C,
- Install the device near the rear-view mirror to obtain the best open-field view. Do NOT install the Dash Cam in a location that will obstruct your required driving view.
- The Dash Cam supports a class 1 o micro SD card up to 128GB. Format the SD card via App before using it, and format it regularly to maximize the lifetime of the memory card.
- Do not use cardboard, paper towel, or napkin to clean the lens.
- Do not attempt to repair, dismantle, or modify the Dash Camera hardware by yourself.
- Do not install the product in an environment with high humidity, or combustible gases or liquids.
- Drawings for Illustration purposes only. The actual product may vary due to product enhancement.
CUSTOMER SUPPORT
For customer support and firmware updates please visit
www.en.ddpai.com. You can also email a Customer
Suppor1 expert at feedback@ddpai.com.
OTHER
This product Is made In China.
- Manufacturer Name: DDPAI Technology Co., Ltd.
- Manufacturer Address: Floor 12, Yihua finance building, software park, Yuehai Sub-district, Nanshan District, Shenzhen.
- The Warranty Period: 1 year.
- Use Period: 2 years.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>