DDPAI 9 EagLes A2 Dash Cam User Guide
- June 12, 2024
- DDPAI
Table of Contents
DDPAI 9 EagLes A2 Dash Cam
Product Information
- Product Name: Dash Cam
- Product Model: A2
- Size: 923325.5mm
- Input: 12V 0.5A
- Storage: Class 10 TF card up to 128 GB, loop recording
Specifications
- Front Camera
- Rear Camera
- 3M Adhesive for Dash Cam
- User Guide
- GND VCC ACC to dash cam Power Cable
Package Contents
- Parking Monitoring Indicator
- TF Card Port
- Reset Button
- MIC
- Power Port
- Mounting Port
- Speaker
- Working Indicator
3 PRODUCT OVERVIEW
- 1 Parking Monitoring Indicator
- 2 TF Card Port
- 3 Reset Button
- 4 MIC
- 5 Power Port
- 6 Mounting Port
- 7 Speaker
- 8 Working Indicator
LED Indicator Instruction
| Name | Description |
|---|---|
| Working indicator (Blue light) | Flashes slowly indicating the dash cam is |
working normally.
Flashes quickly indicating the storage area of the dash cam is
abnormal. A constant light indicates the dash cam is upgrading or
working abnormally.
Parking monitoring indicator (Red light)| Flashes slowly indicates the dash
cam is in parking mode.
Installation
-
Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
-
Align the mounting bracket with the mounting Port of the dash cam, and slide it forward until it clicks into place.
-
Remove the protective film from the back of the bracket, attach the adhesive side of the bracket on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view.
-
Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the powercable to the fuse box.
Note: Most vehicles have a fuse box underneath the dashboard on the driver’s or passenger’s side. -
Turn on the Dash Cam after installation, you will hear a sound indicating that the Dash Cam is powering up and will start recording. The LED indicator will blink slowly in normal mode.
-
Loosen the studs on the bracket and adjust the camera angle. We recommend pointing the lens slightly downwards (≈10° below horizontal), to ensure that the camera view is parallel to the ground. Recommendation: The ground/sky ratio is approximately 6:4. It is recommended to adjust the Dash Cam position while looking at the screen to select the best viewing angle. After adjustment, tighten the studs on the bracket.
App Instruction
To use the DDPAI App:
-
Install the DDPAI App by scanning the QR code provided.
Pair Smart Phone to Dash Cam
-
iOS: Pair your smartphone to the Dash Cam by keeping them within 2.5 meters. Launch the DDPAI App and tap on Device > Connect new devices. Choose your DDPAI Dash Cam from the network list (turn on WLAN from Settings -> WLAN). The Dash Cam’s default SSID (or Wi-Fi name) is DDPAI_A2_XXXX. Enter the default password `1234567890′.
-
Android: Pair your smartphone to the Dash Cam by keeping them within 2.5 meters. Launch the DDPAI App and tap on Device > Connect new devices. The App will automatically search for the Dash Cam network. Choose your DDPAI Dash Cam from the list and enter the default password `1234567890′.
-
Once connected, you can preview and control the Dash Cam through the App. Rotate your smartphone or press expand to view the preview screen in landscape mode.
-
To download video files, tap and drag the timeline bar toselect the desired recording. Tap on the thumbnail or wait forbuffering, then enter the download start screen. After the video has finished downloading, click Complete.
Preview
- Open the DDPAI App, and add your Dash Cam.
- Select “Device > Entering” tab, this will bring you to the preview page.
Rotate your smart phone or press expand icon, turn the preview screen to landscape mode.
Playback
Tap and left/right drag timeline bar at the screen bottom to create the
starting point of the recording you wish to preview, then tap on thumbnail
when you have made your selection, or wait for 5 sec for buffering, now you
can watch the history recording.
Download Video Files
- Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
- Tap on from preview screen to enter the download interface.
- After the video has finished downloading, click “Complete”.
CONTACT
- http://en.ddpai.com
- [email protected]
- DDPAI Technology Co., Ltd
- Floor 12, Yihua finance building, Software park, Yuehai Sub district, Nanshan district, Shenzhen
For more information and FAQs, Please scan the QR code: