DDPAI Mini 1080P FullHD Dashcam User Guide
- June 12, 2024
- DDPAI
Table of Contents
DDPAI Mini 1080P FullHD Dashcam
Product Information
- Specifications: The product comes with a USB charger, Dash Cam, 3.5m vehicle power installation tool cable, and a user guide. It also has a micro USB port, reset key, SD card slot, mounting bracket, LED indicator, rotating shaft, 3M adhesive pad, microphone (MIC), and loadspeaker.
- Package Contents: USB Charger, Dash Cam, 3.5m Vehicle Power Installation Tool Cable, 3M Adhesive
- Product Overview: The product consists of a micro USB port, reset key, SD card slot, mounting bracket, LED indicator, rotating shaft, 3M adhesive pad, microphone (MIC), and loadspeaker.
- LED Indicator Instruction: The LED indicator has different colors to indicate various states of the product. The descriptions for each state are as follows:
Name| Description
---|---
Working Fine| Red light flashes slowly
Booting| Red light is always on
Storage Abnormal / Working Abnormally| Purple light flashes quickly
Parking Monitoring| Blue light flashes slowly
USB Data Transmission Mode| Blue light is always on
Upgrading| Purple light is always on
Product Usage Instructions
- Installation:
- Clean an area on the windshield where you want to install the Dash Cam.
- Remove the protective film from the back of the bracket and attach the adhesive side of the mount on the windshield, ensuring it has an unobstructed view of the road but does not interfere with the driver’s view.
- Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into the cigarette lighter socket) and power cable.
- Turn on the engine after installation. You will hear a boot tone, and the Dash Cam will power up and start recording. An LED indicator will blink slowly in normal mode.
- App Instruction:
- To use the DDPAI App, install it by scanning the QR code provided.
- iOS: Pair your smartphone with the Dash Cam by keeping them within 2.5 meters. Launch the DDPAI App and tap on Device > Connect new devices. Choose your DDPAI Dash Cam from the network list. The default SSID (Wi-Fi name) of the Dash Cam is DDPAI_mini_XXXX. Enter the password (default: 1234567890). Wait for a few seconds until the preview screen appears.
- Android: Pair your smartphone with the Dash Cam by keeping them within 2.5 meters. Launch the DDPAI App and tap on Device > Connect new devices. The App will automatically search for the Dash Cam network. For iOS phones, turn on WLAN from Settings -> WLAN. The default SSID (Wi-Fi name) of the Dash Cam is DDPAI_mini_XXXX. Enter the password (default: 1234567890). Wait for a few seconds until the preview screen appears.
- Preview:
- Open the DDPAI App and add your Dash Cam.
- Select Device > Entering tab to go to the preview page.
- To expand the preview screen to landscape mode, rotate your smartphone or press the icon.
- To playback recordings, tap and left/right drag the timeline bar at the bottom of the screen to create the starting point of the recording you wish to preview. Tap on the thumbnail or wait for 5 seconds for buffering to watch the history recording.
- Download Video Files:
- To download specific recordings, tap and left/right drag the timeline bar at the bottom of the screen to create the starting point of the recording you wish to download. Tap on the thumbnail or wait for 5 seconds for buffering to enter the download start screen.
- In the download interface, wait for the video to finish downloading and click “Complete”.
Contact Information
- Website: en.ddpai.com
- Email: feedback@ddpai.com
- Company Address: Floor 12, Yihua finance building, Software park, Yuehai Sub district, Nanshan district, Shenzhen
For more information and FAQs, please scan the QR code provided.
SPECIFICATIONS
- Product Name: Dash Cam
- Product Model: mini
- Input: 5V = 2A
- Storage: TF card (up to 128GB), loop recording
PACKAGE CONTENTS
PRODUCT OVERVIEW
1. micro USB Port
2. Reset Key
3. SD Card Siot
4. Mounting Bracket
5. LED Indicator| 6. Rotating Shaft
7. 3M Adhsive Pad
8. MIC
9. Loadspeaker
---|---
LED INDICATOR INSTRUCTION
| Name | Description |
|---|---|
| working fine | Red light flashs slowly |
| Booting | Red light is always on |
| Storage abnormal/working abnormally | Purple light flashs quickly |
| Parking monitoring | Blue light flashs slowly |
| USB data transmission mode | Blue light is always on |
| Upgrading | Purple light is always on |
INSTALLATION
-
Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
-
Remove the protective film from the back of the bracket, attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.
-
Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
-
Turn on the engine after installation, you will hear a boot tone, the Dash Cam powers up and starts recording, meanwhile, an LED indicator will blink slowly in normal mode.
-
Adjust the angle of the lens by rotating the Dash Cam. We recommend pointing the lens slightly downwards (=10° below horizontal), so as to record video with a 6:4 road to background ratio. It is recommended to adjust the Dash Cam position while looking at the screen to select the best viewing angle.
APP INSTRUCTION
Install DDPAI APP
Scan the QR code to download the “DDPai’ APP.
Pair Smart Phone to Dash Cam
- Keep the Dash Cam and mobile phone within 2.5meters.
- Launch DDPAI App, tap on “Device > Connect new devices.
- Choose your DDPAI Dash Cam from the network list(For Android system, App will start to search Dash Cam network automatically. For 10S phone: turn on WLAN from “Settings ->WLAN”). The Dash Cam’s default SSID (or Wi-Finame) is DDPAI_mini_XXXxX.
- Enter the password (the default password is ‘1234567890’).
- Enter DDPAI App, wait a few seconds until the preview screen show.
Preview
-
Open the DDPAI Apo and add your Dash Cam.
-
Select “Device > Entering” tab, this will Bring you to the preview page.
-
Rotate your smart phone or press expand icon turn the preview screen to landscape mode.
Playback
Tap and left/right drag timeline bar at the screen bottom to create the
starting point of the recording you wish to preview, then tap on thumbnail
when you have made your selection, or wait for 5 sec for buffering, now you
can watch the history recording.
Download Video Files
- Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
- Tap on from preview screen to enter the download interface.
- After the video has finished downloading, click “Complete”.
CONTACT
- en.ddpai.com
- feedback@ddpai.com
- DDPAI Technology Co., Ltd
- Floor 12, Yihua finance building, Software park, Yuehai Sub district, Nanshan district, Shenzhen
For more information and FAQs, Please scan the QR code:
Documents / Resources
|
DDPAI Mini 1080P FullHD
Dashcam
[pdf] User Guide
20204000196, Mini, Mini 1080P FullHD Dashcam, 1080P FullHD Dashcam, FullHD
Dashcam, Dashcam
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>