DDPAI 4MINI Dash Cam User Guide

: June 6, 2024
: DDPAI

Table of Contents

SPECIFICATIONS
PACKAGE CONTENTS
PRODUCT OVERVIEW
LED INDICATOR INSTRUCTION
INSTALLATION
APP INSTRUCTION
CONTACT
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

DDPAI 4MINI Dash Cam

SPECIFICATIONS

Product Name: Dash Cam
Product Model: mini
Input:5V ⎓ 2A
Storage: TF card (up to 128GB), loop recording

PACKAGE CONTENTS

3M Adhesive

|

User Guide

|

USB Charger

---|---|---

Dash Cam

|

3.5m Vehicle Power Cable

|

Installation Too

PRODUCT OVERVIEW

1 micro USB Port

2 Reset Key
3 SD Card Slot
4 Mounting Bracket
5 LED Indicator
6 Rotating Shaft
7 3M Adhsive Pad
8 MIC
9 Loadspeaker

LED INDICATOR INSTRUCTION

*Name*	*Description*
Working fine	Red light flashs slowly
Booting	Red light is always on
Storage abnormal / working abnormally	Purple light flashs quickly
Parking monitoring	Blue light flashs slowly
USB data transmission mode	Blue light is always on
Upgrading	Purple light is always on

INSTALLATION

Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
Remove the protective film from the back of the bracket, attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.
Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
Turn on the engine after installation, you will hear a boot tone, the Dash Cam powers up and starts recording, meanwhile, an LED indicator will blink slowly in normal mode.
Adjust the angle of the lens by rotating the Dash Cam. We recommend pointing the lens slightly downwards (10° below horizontal), so as to record video with a 6:4 road to background ratio. It is recommended to adjust the Dash Cam position while looking at the screen to select the best viewing angle.

APP INSTRUCTION

Install DDPAI APP

Scan the QR code to download the “DDPai” APP.

iOS

Android

Pair Smart Phone to Dash Cam

Keep the Dash Cam and mobile phone within 2.5meters.
Launch DDPAI App, tap on “Device > Connect new devices”.
Choose your DDPAI Dash Cam from the network list(For Android system, App will start to search Dash Cam network automatically. For iOS phone: turn on WLAN from “Settings ->WLAN”). The Dash Cam’s default SSID (or Wi-Fi name) is DDPAI_mini_XXXX.
Enter the password (the default password is `1234567890′).
Enter DDPAI App, wait a few seconds until the preview screen show.

Preview

Open the DDPAI App, and add your Dash Cam.
Select “Device > Entering” tab, this will bring you to the preview page.

Rotate your smart phone or press expand icon, turn the preview screen to landscape mode.

Playback

Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, now you can watch the history recording.

Download Video Files

Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
Tap on from preview screen to enter the download interface.
After the video has finished downloading, click “Complete”.

CONTACT

en.ddpai.com
feedback@ddpai.com
DDPAI Technology Co., Ltd
Floor 12, Yihua finance building, Software park, Yuehai Sub district, Nanshan district, Shenzhen