DDPAI N1 Dual Dash Cam User Guide

June 12, 2024
DDPAI

DDPAI N1 Dual Dash Cam

SPECIFICATIONS

  • Product Name : Dash Cam
  • Model : NI Dual
  • Input : 5V==1A
  • Size : 92°33*25.5MM
  • Storage : Class 10 TF card
  • GPS : Butlt-In GPS module (optional)

PACKAGE CONTENTS

PRODUCT OVERVIEW

DDPAI-N1Dual-Dash-Cam-fig- \(2\)

LED INDICATOR INSTRUCTION

DDPAI-N1Dual-Dash-Cam-fig-
\(3\)

INSTALLATION

  1. Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
  2. Take out the Dash Cam and bracket from the box, push the lock button on the bracket, and insert the USB Type-C port of the bracket into the USB Type-C port of the Dash Cam to ensure that the bracket fits firmly.
  3. Remove the protective film from the back of the bracket, and attach the adhesive side of the bracket on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.DDPAI-N1Dual-Dash-Cam-fig- \(5\)
  4. Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
  5. Turn on the Dash Cam after installation, you will hear a boot tone, and a blue light flashes slowly.
  6. Connect the DDPAI App, refer to the reference line on the preview interface, and rotate the bracket to adjust the camera angle.

APP INSTRUCTION

Install DDPAI APP

Scan the QR code to download the ‘DDPal* APP.

Pair Smart Phone to Dash Cam

  1. Keep the Dash Cam and mobile phone within 2.5 meters.
  2. Launch DDPAI App, tap on “Device > Connect new devices”.
  3. Choose your DDPAI Dash Cam from the network list(For Android systems, App will start to search the Dash Cam network automatically. For iOS phones; turn on WLAN from ‘Settings ->WLAN*). The Dash Cam’s default SSID (or WI-Fi name) is DDPAL_ XXXX.
  4. Enter the password (the default password is ‘1234567890.
  5. Enter DDPAI App, and wait a few seconds until the preview screen shows.

Preview

  1. Open the DDPAI App, and add your Dash Cam.
  2. Select “Device > Entering” tab, this will bring you to the preview page.DDPAI-N1Dual-Dash-Cam-fig- \(9\)
    Rotate your smart phone or press expand (} icon, turn the preview screen to landscape mode.

Playback

Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on the thumbnail when you have made your selection, or wait for 5 sec for buffering, now you can watch the history recording.DDPAI-N1Dual-Dash-Cam-fig-
\(10\)

Download Video Files

  1. Tap and left/right drag the timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on the thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
  2. Tap on © from the preview screen to enter the download interface.
  3. After the video has finished downloading, click “Complete’

Fcc Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
FCC ID: ZAJFX-A25PRO
The distance between the user and the products should be no less than 20cm

CONTACT
disen.ddpal.com
feedback@ddpai.com
Ele DDPAI Technology Co., Ltd
© 28F, Building 8A, International Innovation Valley. Nanshan District, Shenzhen, Guangdong Province

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals