DDPAI N3 Dash Cam User Guide

: June 6, 2024
: DDPAI

Table of Contents

GPS AND SR
SPECIFICATIONS
PACKAGE CONTENTS
PRODUCT OVERVIEW
LED INDICATOR INSTRUCTION
INSTALLATION
APP INSTRUCTION
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

N3 Dash Cam
User Guide

GPS AND SR

The GPS can synchronize the driving trajectory and various GPS-related parameters on the DDPAI APP of a mobile phone, including GPS positioning and GPS track recording.

The SR can import the GPS data and sensor data into the video to generate an exclusive, cool trajectory interface, giving you a better visual and content sharing experience

NOTE: The GPS version of the Dash Cam supports GPS and SR The normal version of the Dash Cam doesn’t support GPS and SR.

SPECIFICATIONS

Product Name: Dash Cam
Model: mola N3,mola N3 GPS
Input: 5V= 2A
Size: 993628mm
Storage: Class 10 TF card up to 128GB,loop recording
GPS: Built-in GPS module

PACKAGE CONTENTS

PRODUCT OVERVIEW

1 Parking monitoring indicator	6 Reset button
2 Lens	7 Mounting bracket
3 USB Type-C port	8 Speaker
4 Working indicator	9 Lock button
5 MIC	10 Micro SD card slot

LED INDICATOR INSTRUCTION

Name	Description
working properly	Blue light flashes slowly
Parking monitoring	Red light flashes slowly
Upgrading	Red and blue lights are always on

Storage abnormal /
working abnormally| Blue and red lights flash quickly

INSTALLATION

Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in the adhesion.
Take out the Dash Cam and bracket from the box, push the lock button on the bracket, and insert the USB Type-C port of the bracket into the USB Type-C port of the Dash Cam to ensure that the bracket fits firmly.
Remove the protective film from the back of the bracket, attach the adhesive side of the bracket on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view As shown below
Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
Turn on the Dash Cam after installation, you will hear a boot tone, and a blue light flashes slowly.
Connect the DDPAI App, refer to the reference line on the preview interface, and rotate the bracket to adjust the camera angle.

APP INSTRUCTION

Install DDPAI APP
Scan the QR code to download the “DDPai” APP

|
---|---
https://apps.apple.com/cn/app/id1139717657| https://play.google.com/store/apps/details?id=com.cam.ddpai_overseas

Pair Smart Phone to Dash Cam

Keep the Dash Cam and mobile phone within 2.5meters.
Launch DDPAI App, tap on “Device > Connect new devices”
Choose your DDPAI Dash Cam from the network list(For Android system, App will start to search Dash Cam network automatically For iOS phone turn on WLAN from “Settings ->WLAN”). The Dash Cam’s default SSID (or Wi-Fi name) is DDPAI_mola N3_XXXX
Enter the password (the default password is ‘1234567890’)
Enter DDPAI App, wait a few seconds until the preview screen shows

Preview

Open the DDPAI App, and add your Dash Cam
Select the “Device > Entering” tab, this will bring you to the preview page

Rotate your smartphone or press expand Icon, turn the preview screen to landscape mode.
Playback
Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on the thumbnail when you have made your selection, or wait for 5 sec for buffering, now you can watch the history recording

DDPAI N3 Dash Cam User - Playback

Download Video Files

Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on the thumbnail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
Tap on from the preview screen to enter the download interface
After the video has finished downloading, click Complete