Cj Global BL2101 8 Inch True Wireless Speaker Datasheet

User Manual
BASS4 TWS
8″ TRUE WIRELESS SPEAKER

when synched with a second TWS enabled speaker

FEATURES:

12W Power
TF Card Player
USB Player
Karaoke
LED Display| Bluetooth® Player V5.0
FM Tuner
Microphone In
1200mAh Battery
RGB Lights
---|---

SPECIFICATIONS:

Output Power: 12W
Power Supply: DC 5V
Speaker size: 8”
Control: On/Off/Volume, Mode, Play/Pause, Next song, Previous song, Mic Volume, Mic Echo
Input: Bluetooth/AUX/USB/TF/FM/MIC
Speaker frequency: 50HZ-20KHZ
Bluetooth Version: V5.0 JL
Operation Range: Up to 10 meters
Built in 1200mAh Lithium Battery
Recharge Time: 2 hours
Playback time: 3 hours (volume at 50%)
Multicolor LED Light

PANEL LAYOUT & FUNCTIONS:

1. DC 5V Input/Charge Status
2. Microphone In
3. Power/Volume
4. Line In 1
5. LED Display 1
6. Mode 1
7. Next| 8. Play/Pause
9. Previous
10. USB
11. Treble
12. Bass
13. TF Card
---|---

SAFETY INSTRUCTIONS:

Please read these instructions carefully before operating this device.

Power Source

• Only use the power supply that came with the product or, if not included, use the power supply is indicated in this manual. Using an unauthorized power supply will invalidate your guarantee and may irrecoverably damage the product.
• Disconnect your party speaker from the power supply during thunderstorms.
• Always check that you have completely switched off your Party Speaker, before you change or disconnect the power supply.

Moisture and Water

• Do not leave it in low temperatures as moisture can form inside the product, which may damage the circuit board.
• Keep away from heat sources and flames
• Do not leave it in high temperatures as electronic devices and plastic parts may warp in heat.

Ventilation

• Do not block or cover slots, holes or openings on the product by placing on soft furnishings such as carpets, rugs or beds as these are provided for functionality and/or ventilation to ensure safe operation of the product.
• The underneath and sides of this product may become warm after a long period of use. This is normal.

Positioning the Party Speaker
It is important that you consider carefully in advance where your Party Speaker will be situated and make sure that it is:

• On a flat and stable surface.
• At least 3 feet away from other electrical appliances to avoid interference.
• Where there is enough height for the telescopic radio aerial.
• Never place your Party Speaker directly onto antique or polished surfaces.

Caution
To avoid possible hearing damage, do not listen to this Party Speaker at high volume levels for long periods of time.

Always keep the volume within reasonable limits.

General Safety Information

• Keep the product and all its parts out of reach of small children.
• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

CHARGING THE SPEAKER:
Plug the included cable into any USB wall Charger (not included) and into the Micro USB charging port on the front of the speaker. The red LED by the port indicates the speaker is charging. When fully charged, the LED turns off. When using the speaker, it can be used on battery power or being plugged into the USB wall charger (not included).

BLUETOOTH® CONNECTION:

1. Turn the volume control knob to turn on the speaker. On startup, it defaults to Bluetooth” mode.
2. Turn on your Bluetooth” device and search for “BASS4”. Select it to pair.
3. You will get a voice prompt when your Bluetooth® device is connected.

TWS CONNECTION:

1. Turn on both speakers
2. Press and hold the Play/Pause key on either speaker
3. You’ll hear a beep indicating the pairing between the speakers has been completed successfully
4. Proceed to pair normally to your mobile device

MICRO TF FUNCTION:

• Insert a Micro TF card. TF mode will start automatically. In order for the speaker to recognize the song these should be .mp3 or .wav format.
• Press “PLAY/PAUSE” to play or pause the music.
• Press “NEXT” button to go to next song.
• Press “PREVIOUS” button to restart song or return to previous song.

USB FUNCTION:

• Insert a USB Flash drive. USB mode will start automatically. In order for the speaker to recognize the song these should be .mp3 or .wav format.
• Press “PLAY/PAUSE?” to play or pause the music.
• Press “NEXT” button to go to next song.
• Press “PREVIOUS” button to restart song or return to previous song.

FM RADIO FUNCTION:

• Press “MODE” on the speaker to switch to FM mode.
• Press “PLAY/PAUSE?” to enter into automatic FM channel searching.
• Press “NEXT” button to go to the next frequency.
• Press “PREVIOUS” to go back to previous frequency.

LINE IN:

• Press “MODE” on the speaker to switch to LINE IN mode.
• Press “PLAY/PAUSE?” to play or pause the music. .
• Press “NEXT” button to go to next song.
• Press “PREVIOUS” button to restart song or return to previous song.

MICROPHONE:

In order to use the microphone simply connect the mic’s cable to the “MIC IN” input. You can control the volume and echo of the mic with the knobs “MIC CONTROL” and “ECHO”.

FCC STATEMENT:

This davice complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference, received, including interferance that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferance to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to corract the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the raceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Cranes is not responsible for any changes ce modifications not expressly approved by the party resporetle fer cormplance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated 10 meet general RF sqoasure requirement. The device can be used in portable exposure conditions without restriction.

BASS4

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receivingantenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

is distributed by CJ Global Inc.
All rights reserved. 2010 Maple Ave Fair Lawn NJ 07410
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by CJ Global is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>