mesko MS 4126 Juicer For Fruit User Manual

: June 13, 2024
: mesko

Table of Contents

mesko MS 4126 Juicer For Fruit
Product Information
Product Usage Instructions
GENERAL SAFETY
DESCRIPTION OF DEVICE
BEFORE FIRST USE
DISMANTLING
ASSEMBLE
OPERATING
CLEANING AND MAINTENANCE
TECHNICAL DATA
OTHERS PRODUCT
AFTER SALE SERVICE NOTICE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

mesko MS 4126 Juicer For Fruit

mesko-MS-4126-Juicer-For-Fruit-PRODUCT

Product Information

Product Name: MS 4126

Technical Data:

Voltage: 220-240 V ~ 50/60Hz
Power: 400 W
Max Power: 600 W
Short term operation: 3 min – 30 min stop

Product Usage Instructions

Before First Use:
- Wash the parts of the unit, which will be in contact with food.
- Try to assemble and disassemble the unit for a few times before start working with the units.
General Safety Instructions:
- If using the device in the bathroom, remove the power plug from the socket after use to avoid water proximity risks.
Product Components:
- Filling hole
- Juicer cup
- Base with motor
- Cover
- Juice and pulp separating bowl
Cleaning and Maintenance:
- To easily clean the parts, rinse them under running water immediately after each use.
- Allow the parts to dry before reassembling.
- The juicer cover, filter basket, pulp container, stainless steel filter basket, and juice cup are dishwasher safe (only top rack).
- Wipe the motor base with a damp cloth.
Disposal:
- Separate carton boxes and plastic bags and dispose of them in corresponding waste bins to protect the environment.
- Used appliances should be delivered to dedicated collecting points due to hazardous components that may affect the environment.
- Do not dispose of this appliance in the common waste bin.

GENERAL SAFETY

CONDITIONSIMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let cord hang over edge of counter.
Before cleaning or after use, remove the plug from the socket by holding the socket with your hand. DO NOT pull the power cable.
Never use this device close to water, e.g.: Under shower, in bathtube, or above sink filled with water.
If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.
Do not touch the device or power adaptor with wet hands.
The device has to be turned off after every use.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
If the device utilizes a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
Before you turn on your device, make sure that all parts are installed correctly. Plug it only with put on cover (8), well established security arm (11), properly installed feeder (2).
Before each use, check out the juicer filter. If you see any cracks or damage, do not use the device.
Use the device only when the safety lock is closed.
Do not touch the blades of small mesh filter and stainless steel grater.
Use only accessories supplied by the manufacturer.
Do not remove the container to a pulp during the operation.
During operation, do not put your hands or any objects into feeder (2). To push fruits, use only the pusher (1).
Fruits should be put into feeder during operation, you can not fill feeder with fruit or vegetable at a standstill.
Be careful not to overload the juicer, do not use too much force to push products through the tray (2).
Always unplug the appliance and disconnect the power cord from the unit when not in use, or want to start cleaning it.
Do not disassemble the juicer if it is plugged into a power outlet.
Open safety lock after switching off the appliance and filter stops.
Do not use abrasive cleaners or abrasive scouring pads.
Do not immerse the motor part in water or any other liquid.
The device can not work longer than 3 minutes without interruption. After three minutes, wait 30 minutes.
During the extrusion of thick juice juicers do not switch on more than 1 minute.

DESCRIPTION OF DEVICE

mesko-MS-4126-Juicer-For-Fruit-
FIG-1

Pusher
Filling hole
Pulp container
Juicer cup
3-position knob (I – low speed / 0 – OFF / II – high speed)
Base with motor
Spout (when in up position stops leak a juice)
Cover
Grater and filter basket
Juice and pulp separating bowl
Safety locking handle

BEFORE FIRST USE

Wash the parts of the unit, which will be in contact with food .
Try to assemble and disassemble the unit for a few times before start working with the units.

DISMANTLING

Turn the 3 position switch (5) to off, release the safety locking handle (11).
Remove the cover (8).
Remove the juice and pulp separating bowl (10) together with greater and filter basket (9) by pulling upwards part A (picture at page 2).

ASSEMBLE

Place the juice and pulp separating bowl (10) on base with motor (6), next place rater and filter basket (9) by pushing with both hands to hear “click”.
Put under part A the pulp container (3), next insert the cover (8). Make sure walls of the pulp container (3) and walls of the cover (8) match each other properly.
Fasten safety locking handle (11). Fix up the juice cup (4) under spout (7).

OPERATING

Wash your selection of fruit and vegetables ready for juicing. Most fruit and vegetables such as apples, carrots and cucumbers will not need to be cut to size as these will fit into the feed chute whole.
Ensure the power juicer is correctly assembled. Ensure the stainless steel filter is thoroughly cleaned before each use.
Plug the power cord into a properly power outlet and turn the power ‘1’. Push the two speed switch either in ‘1’ position – for low speed or ‘2’position – for high speed, depending on the type of fruit or vegetable being juiced.
With the motor running, place food into the feed chute. Using the food pusher, gently guide food down the feed chute. To extract the maximum amount of juice, always push the food pusher down slowly.
Juice will flow into the juice jug and the separated pulp will accumulate in the pulp container. The pulp container can be emptied during juicing by turning off the Juicer and then carefully removing the pulp container. (Replace empty pulp container before continuing to juice). Do not allow the pulp container to overfill – that may damage the unit.

NOTE: Bananas are not suitable for juice extractors due to the way the fruit is structured.
NOTE: Only put through things that you would normally eat, for example; Kiwi fruit should be peeled first.

CLEANING AND MAINTENANCE

For easy cleaning – immediately after each use rinse removable parts under running water (to remove wet pulp). Allow parts to dry.
After disassembling the unit all removable parts may be washed in hot soapy water.
The juicer cover , filter bowl surround, pulp container, stainless steel filter basket and juice jar are dishwasher safe (top shelf only).
Wipe the motor base with a damp cloth.
Do not soak the stainless steel filter basket (9) in bleach.
Always treat the filter basket (9) with care as it can be easily damaged.
Discoloration of the plastic may occur with strongly colored fruit and vegetables. To help prevent this, wash parts immediately after use.
If discoloration does occur, the plastic parts can be soaked in 10% lemon juice and water or they can be cleaned with a non abrasive cleaner. To assist with cleaning soak the stainless steel filter basket (9) in hot soapy water for approximately 10 minutes immediately after juicing is completed. If pulp is left to dry on the filter it may clog the fine pores of the filter mesh thereby lessening the effectiveness of the juicer.

TECHNICAL DATA

Voltage: 220-240 V ~ 50/60Hz
Power: 400 W
Max Power 600W
Short term operation: 3min – 30 minut stop
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous