CJ GLOBAL 53895 Solar Sensor LED Light User Manual

CJ GLOBAL 53895 Solar Sensor LED Light

Specification

1. Solar panel: 0.55w, 5.5V
2. Li-ion battery: 1200mAh, 3.7V
3. LED power: 0.2w, 5000K-5500K, 12PCS 22-241m/Pcs
4. Motion angle and distance: 120°, 3m
5. High light delay: 10s
6. Switch: OFF/ON/AUTO MODES
7. Lighting mode functions:

Press once to enter motion sensor mode:

• The light turns on when people are detected and the light turns off after people have left for 15s.
• Press twice to enter motion sensor + low light mode:
• The bright light is on when people are detected and then the low light stays on after the people have left for 15s).

Press three times to enter low light mode:

• The low light is on all of the time.
• Press four times to turn it off.

Product Features

1. Recharge by sunlight and store power for overnight lighting.
2. Over 12 hours of lighting time after one day of charging.
3. Weatherproof IP64, heatproof and durable.
4. Intelligent energy-saving.

OVERVIEW

1. Expansion pillar-hinge
2. Hole
3. Screw
4. Solar panel
5. PIR motion inductor
6. ON/Off Switch button
7. LED panel light

Operating Instructions

1. Unlock and activate the solar light:
   • The internal battery is locked from the factory for safety shipment, so users have to use the supplied Key pin to click the “on/off” switch hole and unlock the battery and lighting system.
2. How to install the device?
   • Please use the supplied Expansion pillar-hinge and screws to mount the device on a Pole or wall anywhere outside you want for lighting.
3. Charging via solar panel:
   • Please install the unit facing south and make sure the solar panel can get good sunlight directly without any shade or glass.
   • Normally it can be fully charged in one day under ideal bright sunlight.
4. Motion sensor function
   • It will auto-turn on the light when motion is detected within 2 meters and lasts 15s, then will auto-turn off.

Working process instructions

• Then screw on the wall with the supplied screws.
• The black button is the start switch It’s open, and then it’s closed.

1. Step 1: Charging under the sun in day time around 7 hours
2. Step 2: Auto bright light at night when people come close (lasts 15 seconds)
3. Step 3: People move away, the light lasts 15s, and then the auto turns off.

Warning:

1. Keep the device away from fire and moist places to avoid explosion, leakage, and moisture; (Weatherproof IP64).
2. Any severe shock to the charger is not recommended.
3. No one except professional technicians should attempt to disassemble the charger to avoid damaging the charger.
4. If the light is blinking, it means the power is very low, you have to charge it with sunlight soon. Otherwise, the device will stop working.
5. If there is no good sunlight or in winter sunlight, especially in North Countries, it may take a longer time to fully charge the device and this is normal for solar products.

Tips:

1. Please fully charge the device before first use.
2. If there is no good sunlight in 3 months, the battery may be out of power, so you have to charge it with bright sunlight when it’s fully charged, please use the Supplied Key Pin to unlock the device and lighting system, otherwise, it can’t work anymore.
3. Mode: on/off, NO DIM MODE.

Package included

• 1 x Holan solar sensor light
• 1 X Expansion pillar-hinge
• 1 x Screw
• 1 x Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>