CJ Global 246WCP LED Wireless Charging Phone Stand Instructions
- June 5, 2024
- CJ GLOBAL
Table of Contents
246WCP LED Wireless Charging Phone Stand
Instruction Manual
Product instruction
Thank you very much for choosing our products.
please read the product description carefully before using the product.
Features of the product
- Simple and exquisite shape
- Mobile phone stand function
- Adjustable holder
- Charging distance ≤8mm
Appearance button
Operation method
- Connect the USB port of the USB cable to the power adapter and the Type-C port to the wireless charger.
- After the product is powered on, the product indicator lights flash blue and white, and the white light is always on.
- Place the device to be charged in the charging indication area of the product. The white light turns blue, the blue light is always on, and the charging state is entered.
Light touch function
- Continuous touch twice to start the first 30% brightness of the light.
- Touch the second light with a brightness of 70%
- Touch the third light brightness to 100%
- Tough the key twice to turn off the light when it is on.
Applicable equipment
Intelligent identification of charging devices; compatible with major brands,
meets the QI standard of mobile devices:
Samsung： Galaxy S6 /Galaxy S7 /Galaxy S8 / Note8 / Note9
Apple： iPhone 8 / iPhone X iPhone XR iPhone XS iPhone XS Max
Huawei： P30 Pro / Mate20 Pro / Mate 20 RS
Xiao MI： MI9 / MIX 2S / MIX 3
(The above are some mainstream devices)
This product supports a fast wireless charging function, which is in line with
QI wireless charging standard;
Short-range radio energy transmission is realized through magnetic induction.
This device supports all mobile devices meeting QI standards;
When using a 5V output adapter, the wireless charger supports a 5W load. The
wireless charger supports a 10W load when using an adapter conforming to QC2.0
or above; With overcharge protection, overvoltage protection (9V), and
overcurrent protection (2A).
Precaution
- Do not use or store the product for long periods of time in direct sunlight or at high temperatures.
- Do not charge too close to magnetic cards, magnetic recording media, and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the AC adapter with wet hands.
- Keep this product away from water or other liquids.
- If you want to clean the product, please disconnect the power.
- Product working environment temperature range: -20-45 ° C.
Product parameter
Product material: imported ABS+PP+ hardware
Power input: DC5V/2.1A 9V/1.67A
Power output: DC5V/1A 9V/1.2A
Charging efficiency: 75%
Power: 10W
Product size: 191 × 203 × 13mm
Product weight: 380g
Power supply port is the international common Type C port
Packaging accessories
Wireless charger: 1
USB power cord: 1
Description Book: 1
Packing box: 1
Environmentally friendly plastic box: 1*
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is
Subject To the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not explicitly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
ISED Statement
- This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.