Cj Global 537BSRS Wireless Remote Shutter Owner’s Manual
- June 6, 2024
- CJ GLOBAL
Table of Contents
Wireless Remote Shutter
Product Illustration
Specification
MODEL |! Shutter
Communication – v4.0
Transmit frequency – 2.4GHz -2.4835GHz
Communication distance – 10m(30ft)
Battery life – CR2032 X1 cell/about 6 months under working in 10 times a
day
Dimension – 48mm X 30mm X 10mm
Weight About – 8g
Battery
How To Use
1.Paring
a. Turn on the shutter by switching the on/off button, the shutter will
enter into pairing mode and indicator LED starts flash quickly at the same
time
b. Activate the function on your phone and sourcing the devices around
c. Select the device of “AB Shutter3 ” from the list and paring will be
finished automatically in few seconds
2.Select APP
Use inbuilt camera APP to taking the photos via i Shutter or you can download
the APP of “camera 360″ from Google play if in built camera cannot be
supported, check the compatible
device and APP in following instruction.
3.Shooting
Selecta correct APP and press the proper button on the shutter for LOS and
Android phones to taking the photos.
Compatible Devices
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful radio
or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Statement – English: This device complies with Industry Canada license -exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>