Cj Global 5WCHG Wireless Car Charger User Manual
- June 6, 2024
- CJ GLOBAL
Table of Contents
Cj Global 5WCHG Wireless Car Charger
Brief introduction
- Indication LED light
- Phone holder
- Wireless Charging Position
- Micro USB Input
Specification
- Wireless Charger Input: 5V/2A, 9V/2A
- Wireless Charger output(Max): 10W (Compatible with 5W or 7.5W) Wireless Distance: 8mm
- Efficiency: ≥75%
- Dimensions: 11595.550mm
- Weight: 60g
Use Operation
Charge other device
-
Use a suitable cable to connect the Wireless Car Charger
(* Remarks: This wireless car charger is suitable for 10W fast charge, need to connect to a Fast Charge power like 9V/2A) -
Fix the Wireless Car charger to car’s air condition mount or somewhere suitable
-
Put a Smartphone in the Wireless Car charger, the gravity design will make the charger close automatically and fix the Smartphone inside.
FCC Statement
This device complies with part 15 and part 18 of the FCC Rules. Operation is
Subject To the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not explicitly
approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
Note: this equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
This device complies with Part 18 of the FCC Rules.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>