CJ Global 24063-DI Wireless Charging Desk Lamp User Manual
- June 5, 2024
- CJ GLOBAL
Table of Contents
CJ Global 24063-DI Wireless Charging Desk Lamp
- Item Name: Wireless Charging Desk Lamp
- Item Number 24063 DI,24061 DI
- Color: White, Black
Main function
- Mobile phone wireless charging
- Lamp 90 135 turn
- Adjust different color and different brightness
- Sensor Touch control
- Built in USB output 5V 500mA
Main specs
- Wireless charging power 5W
- LED power 5W
- Color Temperature 2700K 6500K
- 3 type color Warm Led 2700K/ Cold Led 6500K/ Cold +warm mix
- Adaptor AC110 240v 50 60HZ
- Working current DC5.0 5.25v/3A
- Charging plug micro USB
- LED qty 54pcs/4014 SMD /Epistar /4 level
- Led angel 120
- Lumens 800LUX at 36cm
- CRI: 90MAX
- Lifetimes 50000 hrs
Products Size, weight ,material
- Material ABS+PC +Aluminum
- Products Size 44124cm
- Products weight 3 94 g
Wireless charging specs
- Suit for all mobile phone with wireless charging function
- Wireless charging time Around 4.5 5 hrs
- Wireless charging distance 6mm
- Wireless charging power 5V/1A=5W
- Wireless transfer rate 70%
- Wireless charging standard QI
- FOD: for Metal Object 20mm
Products details
Products picture
- mobile phone Wireless charging
- LED Switch
- LED color choose
- brightness
- Timer:2hrs
- Timer:1hrs
- B rightness
- USB output
- micro5V/3A Input
Products Function details
- mobile phone Wireless charging: Put mobile phone in center position, begin charging(5W)
- LED Switch: When LED turns off, touch to turn on it.
- LED color chooses : When led turn on, touch 1 se cond to make it lighter, and to choose LED color ( Warm, Cold, and Mix ), And last time to touch LED is turn off it.
- brightness When Led turn on, Touch 1 second to adjust 1 time, total 13 levels
- Timer : 2hrs . Led will turn off after 2 hrs.
- Timer : 1hrs . Le d will turn off after 1hrs
- Brightness + When Led turn on, Touch 1 second to adjust 1 time, total 13 levels
- USB output 5V/500mA
- micro5V/3A Package with 5V 3A cable 1M
Products Operation
-
Lamp operation Connect
micro USB/5V/3A With Adaptor, and opera Lamp based on each button -
Wireless charging operation
Put mobile phone to the position and begging wireless charging 。 -
USB Output operation
Connect 5V 3A cable to this USB plug, will begin char g ing at 5V 500mA.
Pay attention to
- Pls make sure use the 5V 3A adaptor and 5V 3 A cable
- Pls make sure the table without water etc.
FCC
Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and any other radio device.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>