AIGOSTAR 330200A06 Cordless Hanheld Vacuum Cleaner Instruction Manual

AIGOSTAR 330200A06 Cordless Hanheld Vacuum Cleaner

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE APPLIANCE AND RETAIN IT FOR FUTURE REFERENCE.

IMPORTANT SAFEGUARDS

1. This is an electrical product; please note there is a risk of electric shock.
2. If the power cord is damaged or there is any other obvious damage, please stop using this product. Do not open the appliance housing or battery pack by yourself; these components must only be repaired by professional maintenance personnel.
3. This product and its charger must be protected from moisture to prevent electric shock.
4. Do not use this product to remove burning ash, lit cigarette butts or matches, pointed objects, broken glass, water or other liquids, as doing so will damage the vacuum cleaner and may endanger personal safety. Burning ash, cigarette butts, etc. will cause the internal filter layer and certain accessories to catch fire, and water or liquid flowing into the machine will cause a short circuit. Sharp objects can damage the filter layer.
5. Do not allow children to play with packaging materials as there is a risk of suffocation.
6. The charger must be disconnected while the product is in use.
7. Do not use this product if the product itself or its charger or power cord is damaged or the product has been discarded.
8. Do not expose the vacuum cleaner to extreme weather conditions (such as thunderstorms, extreme humidity or extremely hot or cold temperatures). When cleaning the vacuum cleaner or performing any maintenance, be sure to turn off the power and unplug the TYPE-C charger from the vacuum cleaner.
9. Be careful when storing the power cord to avoid damaging it. If it is damaged in any way, it should be replaced immediately.
10. Do not allow children to play with electrical products, as they do not recognize the risks involved.
11. This product may still emit a small amount of dust even when the filter frame is in place. If the dust is inhaled by young children, it can cause allergic reactions. If possible, keep children at a distance when using this product.
12. Make sure the filter frame and dust cup are correctly installed when the vacuum cleaner is in use. It is particularly important to ensure that the filter frame is not damaged. Do not put any objects into the air outlet of the product.
13. Keep the product away from heat sources and ovens.
14. If this product is used by a third party, please ensure they have access to the manual.
15. Please use the original USB cable provided or another USB cable with the same technical parameters to prevent damage. To achieve the maximum charging capacity of the battery, it should be fully charged before first use. Under normal circumstances, it takes 4-5 hours to fully charge the appliance.
16. In the charging state, the three indicator lights flash in turn. After a certain amount of charge is acquired, one indicator light remains on. When all three indicator lights remain on, the product is fully charged.
17. In the discharge state, the three indicator lights are always on. As the power decreases, the indicator lights go out in turn. The light flashes one minute before the end of discharge, increasing to six flashes when discharge ends, after which it goes out.
18. If any abnormal noise, smell, smoke or other failure or breakage is detected during operation, turn off the switch immediately and then contact professionals for repair. Do not repair the vacuum yourself.
19. This product must not be in operation when charging.

TECHNICAL SPECIFICATIONS

PRODUCT OVERVIEW

1. Switch button
2. Indicator light
3. Handle
4. Dust cup
5. Detachable 2-in-1 combined nozzle

BEFORE FIRST USE

1. Check that your supply voltage is the same as that stated on the charger.
2. Before the appliance is first used, make sure the filter frame and dust cup are properly installed.
3. This appliance should only be used for domestic cleaning. Please ensure that this guide has been fully understood before operating the appliance.
4. Only use the original charger supplied with the appliance.
5. The 2-in-1 combined nozzle is a vacuum accessory that can be attached to and detached from the body.

OPERATION INSTRUCTIONS

1. Remove the outer cover of the dust cup before starting the machine. Please empty the dust cup and clean it before each use.
2. Press the switch button for about 3 seconds, and the vacuum cleaner starts to operate.
3. Press the switch again, and the vacuum cleaner will stop working.
4. The 2-in-1 combined nozzle is suitable for cleaning creases in fabric as well as hard-to-reach crevices in the wall, corners and slits. When installing the nozzle, insert the tail into the suction port of the product until it is firmly in place.

CLEANING AND MAINTENANCE

1. Turn off the vacuum cleaner, unplug the TYPE-C charger from the appliance, and then clean the body.
2. If necessary, use a dry cloth to clean the body, dust cup, filter frame and accessories.
3. Make sure that no liquid flows into the vacuum cleaner. Do not put any parts of the appliance in the washing machine for cleaning.
4. Do not use abrasive cleaners (detergents, thinners) because they will damage the synthetic surface of the vacuum body.
5. Make sure that all parts of the vacuum cleaner are completely dry before connecting the TYPE-C charger.
6. Clean the dust cup and filter frame with clean water; do not use soap or other cleaning agents as they will damage the filter frame. If the filter frame or dust cup is damaged, it should be replaced immediately.

Cleaning the Dust Cup and Filter Frame

1. After each use, empty the dust cup. When the dust cup is full of dust, in particular, it is recommended to empty it as soon as possible to prevent the dust from flying out. When cleaning the vacuum cleaner, first detach the charger.
2. Step-by-step instructions for cleaning the dust cup and filter frame are given below.

1. Turn off the machine by pressing the switch button, and make sure it is off.
2. Own wards. Rotate the dust cue era he by the ka edition and he dust up faces
3. Rotate the filter frame to the right, and you will hear a clattering sound which indicates that the filter frame is unlocked. Pull it out of the body, and separate the internal HEPA filter from the filter frame to clean the dust.
4. Clean the filter frame by gently tapping it to free it from dust. Then clean the dust cup and filter frame with clean water, and let it air dry.
5. After the dust cup has been emptied, cleaned and air-dried, reinsert the HEPA filter into the filter frame, and insert the filter frame into its original position. Make sure the filter frame’s three mountings match the three grooves on the dust cup: rotate the filter frame to the left until they click and lock into position. Finally, put the dust cup back on and rotate it to the lock position.

DISPOSAL

This mark indicates that this product should not be disposed of with other household waste in Europe. To prevent possible harm to the environment and human health, we suggest that users hand in non-working vacuum cleaners to an appropriate waste disposal centre. Disposal should be environmentally friendly, including collection for recycling wherever possible.

WARRANTY: TWO YEARS.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>