luceco 3.LEXDSS5UD30P-01 Exterior Decorative IP54 LED Stainless Steel with PIR Sensor Wall Light Instruction Manual
- June 13, 2024
- LUCECO
Table of Contents
luceco 3.LEXDSS5UD30P-01 Exterior Decorative IP54 LED Stainless Steel
with PIR Sensor Wall Light
Product Information
- Product Name : EXTERIOR DECORATIVE IP54 LED STAINLESS STEEL UP/DOWN WITH PIR SENSOR WALL LIGHT
- Class : IP54 RATED
- Warranty : 2 years
- Manufacturer : LUCECO
- Address : Stafford Park 1, Telford, Shropshire, England, TF3 3BD
- Website : www.luceco.com
Contact Information:
- Tech Help Line (UK): 0330 0249 279
- Tech Help Line (Non UK): +44 (0)1952 238 100
Supplied by LUCECO
LEX.CL.05.2023
Product Usage Instructions
- Ensure that the wall light is installed in a suitable location according to the provided instructions.
- Before installation, make sure the power supply is turned off.
- Connect the wall light to the power supply using appropriate wiring.
- Once connected, turn on the power supply and test the functionality of the wall light.
- The up/down light feature can be adjusted as desired.
- The PIR sensor enables automatic activation of the light whenmotion is detected. Adjust the sensor settings if necessary.
- Regularly clean the stainless steel surface of the wall light to maintain its appearance.
- In case of any issues or questions, refer to the provided Tech Help Line contact information.
For more information and support, visit the manufacturer’s website at www.luceco.com.
This Luminaire contains a light source of Class
ACCESSORIES
Installation & Operating Instructions
Adjustable PIR control
| MIN| MAX
Duration| 15 secs| 5min
LUX Control| 2 LUX| 2000 LUX
Sensitivity| | Sm
DURATION TIME : The length of time that remains switched on after activation is adjustable from 15 seconds up to 5 minutes.
Note : Once the lamp has been triggered by the PIR sensor any subsequent detection will start the timed period again from the beginning.
-
LUX CONTROL LEVEL :
The Lux control module has a built-in sensing device (CDS) that detects daylight and darkness. The LUX CONTROL LEVEL is adjustable from daylight to night; it is means that the lamp can be turned on after activation in daylight or in night according to you setting. -
SENSTIVITY LEVEL :
The sensitivity determines the max. detection range that the sensor covers, you can adjust the knob of “sens” for this function. At the max. position, the sensor’s detection range will be max. 8 meter.
Tech Help Line
- UK: 0330 0249 279
- Non UK: +44 (0)1952 238 100
Supplied by LUCECO Stafford Park 1, Telford, Shropshire, England, TF3 3BD Visit our website at www.luceco.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>